[vecher]

Started to do a 48-1264 radio /Phono.. However The schematics I have are not very eligible.. Does any one have a clean copy?

First problem is the output transformer.. I think the DC reading are 300 Ohms one side and 250 ohms other I get about 150 ohms each side so about 1/2 of what schematic says.. Providing I read it correctly very blurry



Skip

[morzh]

Make sure the outer ends of primary are not shorted in some way (like shorted cap in between). That will result in half-reading.

[Ron Ramirez]

The schematic for the 48-1264 is in the Library:

https://philcoradio.com/library/download...8-1949.pdf