Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

38-93.....so far
#1

Finally getting some time to work on this. It belonged to my long-gone Grandparents once upon a time.

After I removed the compost pile, the chassis was pretty deeply pitted in places so I ended up glazing and painting it. (topside only)
New tube sockets are in and I'll start the fun part this evening.


Attached Files Image(s)
           

"He has all the virtues I dislike and none of the vices I admire." — Winston Churchill
#2

Looks great!

How are you re-riveting the tube sockets? What tools and materials does that take?
#3

Thank you. Do an EBay search for "3/16 eyelet setter and anvil". These tools are used a lot by leather crafters. When I get back to my work computer in the morning I'll post a link for the exact eyelets I used. These are actually just a fuzz larger in diameter than the originals.

"He has all the virtues I dislike and none of the vices I admire." — Winston Churchill
#4

When I neeced it I went to hobby lobby. See if they have it. I found what I needed to put eyelets into the filter choke in my 16B.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#5

Yes! very nicely done!
Icon_thumbup Icon_thumbup Icon_thumbup
#6

And yes, very nice.
I wish I had a resolve to go to such extents, stripping components, wiring etc. I only can bring myself to clean and derust, then just restore as necessary.
Looks beautiful.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#7

Fine job. Yes, fine job. Icon_thumbup

--
Ron Ramirez
Ferdinand IN
#8

 Great job. Icon_thumbup If you don't mind... What color was the paint you used on the chassis?
#9

It's actually engine block paint. Dupli-Color engine enamel- the color is "Cast Coat Aluminum" PN DE1650. You can find it on the shelf at Advance Auto Parts.... If you have one in your area.
I also went over it with Minwax Clear Satin Lacquer.

"He has all the virtues I dislike and none of the vices I admire." — Winston Churchill
#10

Thanks everyone for the feedback. I probably would not have gone to this extent but for the sentiment. My dad grew up with this radio and the thought of getting to hear it again made him happy.

"He has all the virtues I dislike and none of the vices I admire." — Winston Churchill
#11

(11-17-2016, 03:25 PM)Nathan Slingerland Wrote:  Looks great!

How are you re-riveting the tube sockets? What tools and materials does that take?

https://www.amazon.com/gp/product/B00BL6...UTF8&psc=1

"He has all the virtues I dislike and none of the vices I admire." — Winston Churchill
#12

Last night's progress. I'm not sure if there is a set method to determine wire color for wire colors that are not listed on schematics. The power transformer and the I.F. transformers are the only things identified with specific colors on my schematic.

Time and dirt had turned all of the original wiring various shades of brown. The heater supply was the only thing I could ID positively, it appeared red....so red it is.   


Attached Files Image(s)
   

"He has all the virtues I dislike and none of the vices I admire." — Winston Churchill
#13

This might help... or might not.
http://philcoradio.com/phorum/showthread.php?tid=684
#14

Absolutely, thanks Mike.

"He has all the virtues I dislike and none of the vices I admire." — Winston Churchill
#15

A labor of love for sure!

Mike

Cossor 3468
GE 417A
Philco 118H
Radiola 17/100
Scott 800B6
Silvertone 6130
Stromberg 535M
Truetone D1952





Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently 1735 online users. [Complete List]
» 2 Member(s) | 1733 Guest(s)
AvatarAvatar

>