Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco model 77
#16

http://rs32.pbsrc.com/albums/d5/flathead...0&fit=clip

Here's a photo of the ever elusive parts number page for this set, mine shows a different part number from the 2766, mine shows a 2848, is this the same opt?
#17

I couldn't find that #.  Look here  http://philcoradio.com/phorum/showthread.php?tid=215    under spkr zip.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#18

Tried to open that thread, it says it doesn't exist
#19

Go to Philco Downloadable Files then Philco free download files it's in there under spkr zip file

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#20

Here's the link directly to the speaker file:

http://www.philcoradio.com/phorum/attach...p?aid=5181

It should directly download the speakers.zip file to your PC, then you need to unzip it to read it.
#21

I finally found it and downloaded it, however last night I pulled the opt up to get a better look at it and have 2 loose solder joints. I don't know if this is the problem or not but I'll re solder and try again.
#22

So I've gone back and soldered the broken contacts on the speaker to see if I'd get a different reading, it didn't seem to change the readings or voltages on the 45 tubes so it looks like I am now on the hunt for either a new speaker assembly or a new functioning output transformer. What's going to be the best way try to see if anything comes across ebay eventually or try a looking for ad?
#23

Where did the rest of the thread go?
#24

87 - http://www.philcoradio.com/phorum/showth...?tid=16059

77 - right here Icon_smile

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Restoring Philco 38-14
Well, I climbed down off of that fence and decided to proceed with restoration. I did experiment with the speaker. I n...morzh — 03:49 PM
Philco 71LZ chair side
lol not pondering it’s been mine for at least an hour now ?.  At a local car show with my Jeep will load it up and take ...slford310 — 01:33 PM
Philco 71LZ chair side
If he only wants $40.00 what are you doing still pondering over it? Go get it! Take care and BE HEALTHY! GaryGarySP — 01:29 PM
Philco 370LZ
Just took a closer look at it.  It is a 370LZ not the 71LZ.slford310 — 12:58 PM
Clear Schematic for 41-255
Thank you, Dale. Please take your time. I tried cleaning up a scan in PhotoShop and it helped a little, but after 1.5 hr...RossH — 12:38 PM
Philco 71LZ chair side
He only wants 40 so I think I’ll have to buy itslford310 — 12:13 PM
Clear Schematic for 41-255
Ross - I have an original 1941 Yearbook, but it will be at least a few days before I can get it out of storage and ma...DaleHCook — 11:57 AM
Philco 71LZ chair side
Are you sure that it is a model 71LZ and not the previous years' 370 Lazyboy? Production for both models appears to be 1...Arran — 11:32 AM
Philco 71LZ chair side
What do you guys think is the max I should pay for this??  Always wanted a chair side radio.  slford310 — 10:52 AM
Clear Schematic for 41-255
Hello Ross, Yes, I have had good luck with using my Photoshop in the past to improve schematics and other documents !. ...radiorich — 10:30 AM

[-]
Who's Online
There are currently no members online.

>