Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Handy Hint for those missing lamp jewels in 1940-42 Philcos
#1

Many 1940, 1941 and 1942 Philcos that have a door over the dial also once had a red indicator lens in the cabinet, under the dial door, to indicate if the radio was "on" or not.

This indicator lens (jewel) was made of Tenite, as were many of the plastic parts used in 1941-42 Philco radios. As you know, Tenite has a tendency to shrink over time, and it appears most of these jewels have become lost due to the Tenite shrinking.

Someone over at ARF posted a helpful hint for those looking to replace this missing indicator lens. I wanted to direct your attention to this.

http://antiqueradios.com/forums/viewtopic.php?t=124734

--
Ron Ramirez
Ferdinand IN
#2

Thanks for the suggestion. Bob




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 3957 online users. [Complete List]
» 1 Member(s) | 3956 Guest(s)
Avatar

>