Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 80jr, Calling it done!
#1

First radio restoration in years.
Over 45 years ago went to the dump with a neighbor, saw a Philco cathedral radio sitting there on a pile of old electronics parts, took it home and with the help of my uncle who worked on radios in the 30's/ 40's, got it up and running.
Recently saw this model 80jr radio on craigslist and thought it would be fun to get back into this hobby, didnt realize what I was getting into LOL!

For this cabinet I used the following Mohawk lacquers:
Heavy Body Sanding Sealer M102-0491
Ultra Classic Toner Medium Brown Walnut M100-0207 for the main cabinet
Ultra Classic Toner Light Walnut/ Colonial Maple M100-0352 for the face inner section
Tamiya Spray Black #TS-14 for the line between the light and medium walnut on the front face.
Tone Finish Clear Semi-Gloss M102-0419 for the final clear finish.

I had read on this forum to use the Ultra Classic Toner Perfect Brown for the main cabinet and Medium Brown Walnut M100-0207 for the front face light section, but I found this was too dark for the front light section. So I sanded it off, and used Ultra Classic Toner Light Walnut/ Colonial Maple M100-0352 for the face inner section, but left the sides that meet the grill cloth Medium Brown Walnut, makes for a nice 3d effect that maches the main cabinet color of Medium Brown Walnut.

   
   

Lewis
#2

I like it! Icon_clap

Larry
#3

Looking great!
Icon_clap Icon_clap Icon_clap
#4

Is that the original grill cloth? If not, where did you get it?
#5

I get mine at https://www.richmonddesignsinc.com/
#6

That grill cloth is a good match to that used in the Majestic 90 console and the Westinghouse Columnair.

But we cant be picky now-days. Lot better than somebody's spandex - yes this was common in the 80's.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#7

Thanks guys,
Got the Herringbone grill cloth off of ebay.
https://www.ebay.com/itm/Antique-Radio-S...:rk:2:pf:0

It looks a lot like the original that was on the radio.

Lewis
#8

(11-03-2018, 05:50 PM)Lewiss Wrote:  Thanks guys,
Got the Herringbone grill cloth off of ebay.
https://www.ebay.com/itm/Antique-Radio-S...:rk:2:pf:0

It looks a lot like the original that was on the radio.

Lewis

That is the same guy that Bob mentioned.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#9

thanks.  My 80 jr. has the original but it is a bit shabby.  That cloth looks to be somewhat close to the original and would brighten up the front of my radio a bit.
#10

Very nice attention to detail!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Hi Bridcarl +1 on the others.  Pin 6 of the 7C6 is the AVC Diode so it is appropriate that that pin 4 of the coil con...MrFixr55 — 07:30 AM
462ron
Joseph, this is beyond awesome. A lot of thought and engineering went into this and you hit a home run! Now I must save ...462ron — 07:27 AM
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM

[-]
Who's Online
There are currently 3603 online users. [Complete List]
» 3 Member(s) | 3600 Guest(s)
AvatarAvatarAvatar

>