|
Philco 46-1203
08-02-2020, 08:25 PM
Just started to work on a 46-1203.. found that the resistor R2 ( 50,120 ohm) was missing.. Question what power rating do I need for a replacement ? this is the resistor the is in the filament string..
This radio uses a 50X5.. Not the 50Y6GT Thanks Skip 
08-02-2020, 08:56 PM
Posting a link with info looks to be 2 watt. http://www.nostalgiaair.org/Resources/585/M0013585.htm If it was mine due to higher line voltages would go with 3 or 5 watt if they would fit.
08-12-2020, 06:45 PM
Is there a way to check to see if the electronics are bad or the cartridge is bad.. i get no sound when either touching cartridge or scraping the needle..
Skip
08-12-2020, 07:16 PM
Did you get the radio side of things working??
When my pals were reading comic books I was down in the basement in my dad's workshop. Perusing his Sam's Photofoacts Vol 1-50 admiring the old set and trying to figure out what all those squiggly meant. Circa 1966 Now I think I've got! Terry
08-13-2020, 03:08 PM
As Norm said you need a cartridge. Drop Kirk a note and he can help you pick a suitable replacement.
When my pals were reading comic books I was down in the basement in my dad's workshop. Perusing his Sam's Photofoacts Vol 1-50 admiring the old set and trying to figure out what all those squiggly meant. Circa 1966 Now I think I've got! Terry
« Next Oldest | Next Newest »
Users browsing this thread: 1 Guest(s) |
|
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
