Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What's My Model?
#16

Hi Peter,

Considering that we are comparing tie type of audio stage in this 655 to other Philcos and other amplifiers, it is likely appropriate, especially that we were comparing the 655 to the 645.

Again, great info and conversation!!

"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8
Best Regards, 

MrFixr55
#17

Yes, John. It is by comparing these two models that it is clearly visible that in the more expensive Philco 655 model, two 6F6 lamps are used in the output stage in a triode connection, while in the cheaper 645 model we see the same lamps, but in a standard pentode connection. So we can conclude which type of connection is best for correct sound.

Old Tube Radio Online Museum / Музей ретро радіо
https://www.youtube.com/user/RadioSvit?d...lymer=true

Sincerely Peter
З повагою Петро
#18

For those wondering what " triode inclusion" is: it means "triode arrangement / triode conenction".

(The reason of this is that in Russian "включение" means both "hook-up arrangement or mode" and "inclusion").

BTW, one of the advantages of using pentodes in whichever mode is that they, simply speaking, are still widely available (and if needs be, are arranged as triodes) whereas the triodes ars simply much harder to find.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#19

The restoration posts on this model have been moved to the restoration thread open on this same model:

https://philcoradio.com/phorum/showthread.php?tid=24276

Please post restoration topics about this radio in that thread and not here. Thanks.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM

[-]
Who's Online
There are currently no members online.

>