Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Zenith K731
#1

https://www.flickr.com/photos/92577012@N...ed-public/

Anyone else have one of these little gems, Nice morning, coffee, music on the radio, sun is up and not too warm. Zenith certainly hung in there as far as longevity in producing decent tube sets, this little guy is proof.

Paul

Tubetalk1
#2

Have the same set, belong to my late father in law. The very first AM FM set that I worked on. There were several business cards on the inside of the set with a date and the repairs.
#3

I have one also Paul. My brother found it at a fundraiser for a cat rescue place. Strangely my grille cloth looks like it has shrunk and although it works I had planned to recap it and replace the selenium rectifier. I think I even ordered the parts for it and a couple other radios of the same vintage from Mouser..... but then we moved, so they are in a box somewhere....

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#4

Paul Philco322 Wrote:Anyone else have one of these little gems

Nope - with one exception I collect only pre-WWII sets. That exception is my H-500 Transoceanic. The reason why I own that model of TO is that, like me, it is a 1951 model.

Dale H. Cook, GR/HP/Tek Collector, Roanoke/Lynchburg, VA
https://plymouthcolony.net/starcity/radios/
#5

I've got one of those and it was still working fine a month ago before I swapped out the radios for daily use. I have a nice plastic version as well, but I think the filter caps and Selenium went poof from the smell it made last time I used it.

No matter where you go, there you are.
#6

I don't own one, but I have worked on them. They are great sounding and good looking set but they were built during the years when the I.F. transformers were susceptible to Silver Migration. You'll know if/when it happens.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM

[-]
Who's Online
There are currently no members online.

>