Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 37-610 in a 38-9 cabinet
#16

looks like it has 1 bid on it ce la ve.. thanks Doug
#17

As many of us know, several of the 37-6xx chassis' would/ will fit other models Philco cabinets (shafts) holes in different cabinets. Back in the old days, both consoles and table model wood cabinets would sometimes interchange easily. Disregarding the proper shadow meter escutcheons mounting, they weren't necessarily always used. They could be removed entirely from the circuit by adding a wirewound resistor under chassis to rid the shadowmeters entirely. A old timer tube tech that once worked at a authorized Philco service dealer told me this many years ago. The different models of the 37-6xx chassis' type radios would come in for service in various models cabinets. They would repair all the different sets chassis'. Many customers never came back and paid for their Philco repairs, and when they were phoned for pickup of their sets, said the customers told them they had already purchased a new radio instead, leaving the service shops holding all the service charges. After a few months of these similar type chassis' repaired Philco sets taking up room in the repair shops, the techs would then decide and pull various chassis' and match them in other similar Philco cabinets ( that looked better in appearance) to sell them to recoup their parts investments & labor charges. Hence, many 37-6xx type chassis' ended up being mounted in nicer looking cabinets than they came in for repairs. The "swap" shows up from time to time these days. The shadowmeters and escutcheons on several sets could be changed or eliminated to get the chassis' into a more attractive similar cabinet, to recoup the repair shops charges after 90 days as required by law before selling customers merchandise not paid for. Creates "Mystery" Sets for sure these days!
#18

Was going to put this transformer on but not quite sure how to fit in in the cabinet Icon_lol
[Image: http://i1095.photobucket.com/albums/i474...to0065.jpg]
#19

picked up this speaker for it on e-bay model H [Image: http://i1095.photobucket.com/albums/i474...9029_o.jpg]
#20

Next question is how do I wire it al the wires were cut from someone else there's no plug to plug it into and there's no color to the wires from what I see ..Doug
#21

That speaker looks too early to use for a 1937 model, it's more like what a 1929-32 model year floor model might use like a model 86, 76, 95, 96, 111 etc.
Regards
Arran
#22

Canceled the sale of it the seller was nice about it. So Im still looking for a HS speaker it seems.Doug
#23

here's one on e-bay wonder if it would work?
http://cgi.ebay.com/150714921592
#24

So I finally got around to working on this one again and like it phoenix rising from the ashes it lives!!! Replaced the caps and ran new wire to the new old speaker I purchased.It sounds pretty good I guess.I will commence working on the cabinet soon as it stays warm enough to work on it for a weekend or two...pics when I can get them Thanks to all .....Doug
#25

There was a guy who posted in the wanted section for a H or G style for his model 95. His the paper was gone. I think it was last fall or so. May be able to look him up if you don't need it.
Terry
#26

I Finally started sanding the cabinet down today on the inside I found beneath where the chassis lays some numbers written in chalk-crayon It says 37-610 J...
#27

Found this on e-bay looked interesting..
http://www.ebay.com/itm/1938-PHILCO-Art-...1c324bef83
#28

Interesting set another 6vdc farm job.
Terry




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Need to purchase some accessories for restoration of my Old Philco Radio
Hi Paulo, Welcome to the Philco Phorum. I can see why you want to find good reproduction parts. That is a bea...MrFixr55 — 11:10 PM
HiFi (Chifi) tube amp build - but my own design.
Tim, I have some bakelite sockets in my work shop that I can dig up. I believe quite a few are NOS. I will take photo...RodB — 10:03 PM
Philco 610B oscillator wiring
> The cathode as noted is wired directly to the ground side of the heater filament for that tube, not to the #17 and ...Radioroslyn — 08:12 PM
HiFi (Chifi) tube amp build - but my own design.
Tim; I noticed your post a little late, but I would take one of the junk sockets and try to break a chunk out of it wi...Arran — 08:07 PM
Need to purchase some accessories for restoration of my Old Philco Radio
Here is a list of resources found in our online library that you might find useful. Mike's Gobs of Knobs email addres...klondike98 — 01:46 PM
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum.  Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM

[-]
Who's Online
There are currently 2562 online users. [Complete List]
» 1 Member(s) | 2561 Guest(s)
Avatar

>