[Bob]

Hi
I am working on a Philco Model 60. I am starting by replacing the Electrolytic caps #45 & 46 on the service bulletin #164. I notice that the #45 cap had been replaced before. The schematic shows the minus ends of the caps tied together, the 45 cap minus had been grounded. Should I make it like the print or was this grounded for a reason?
Thanks Bob

[morzh]

The print makes sense.

[Ron Ramirez]

Connect the negatives of the electrolytics as shown on the schematic, else you will have an annoying hum you will never be able to get rid of.

[Bob]

Thank you Guys
I'll make it like the "print". I am just starting this rehab , so I will probably be back for more help.
Thanks Again Bob

[codefox1]

So long as the radio is in rehab and you are not, good!