Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

A 1937 Accessory Philco Antenna
#16

My parents-in-law had a lake cabin in northern Wisconsin. It was built in the 20's or before, but they bought it in 1973 or thereabouts. I married into the family in 1982. On one side of the house there was an antenna wire with glass insulators identical to those shown in these pictures, with an uninsulated wire between them and an uninsulated lead coming down in to one window of the house. In the '80s I sometimes took a short wave radio to the cabin to listen to short wave stations, and I connected it to that antenna lead. I didn't know in those days that early AM radios needed external antennas. I figured the antenna was used for short wave.

One of those glass insulators was lost in a remodeling project, but I saved the other. It's cool to think that maybe a Philco antenna kit like the one in these pictures was used for AM radio reception when the cabin was new and had no electricity or plumbing, and the original owners connected their DC radio to listen to music, news, and drama on an early Philco.

Thanks for these pictures.

John Honeycutt




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
New Philco Repair Bench
Morzh is correct. The repair bench on our website is an archived image of chuck’s original site. He no longer provides s...klondike98 — 05:32 PM
Made mistake & did not label connection
Excellent information. It is all starting to come together now and your explanation really helped since I noticed that ...georgetownjohn — 04:39 PM
Made mistake & did not label connection
Hi John, I don't have this radio, but I can supply some info: Based on your pic, pins 7,8 and 1 are used together, go...MrFixr55 — 02:02 PM
New Philco Repair Bench
As far as I know, the Repairbench does not work, and has not been working in a while. Chuck (we had that campaign looki...morzh — 01:33 PM
Radio city products 664 schematic request
Need a schematic or manual for the 664. The 663 may be similar.daveone23 — 12:38 PM
New Philco Repair Bench
Thanks Gary.dconant — 12:16 PM
New Philco Repair Bench
I tried accessing the site through our library and got the same response. It's reported to our tech gurus. GaryGarySP — 11:50 AM
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM

[-]
Who's Online
There are currently 4350 online users. [Complete List]
» 2 Member(s) | 4348 Guest(s)
AvatarAvatar

>