Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Another yes another Model 95 cap question
#1

What are the values of the 2 silver flat caps attached to the chassis under the 24 tube sockets?
#2

[Image: http://antiqueradios.com/gallery/d/15482...+parts.jpg]
Can you identify the caps from this image?

Carl
Northern Panhandle, WV
#3

[Image: http://i7.photobucket.com/albums/y295/de...630555.jpg]

Not on the photo but flat silver boxes, where I drew red rectangles


One has 2 wires the other has 1
#4

Like where #46 is pointing and to the left of it
#5

Not legible enough.....do they have screw on them?
#6

[Image: http://i7.photobucket.com/albums/y295/de...112515.jpg]

These two silver boxes
#7

Oh those...those are 0.2uF in Philco 20, for example (tin boxes).
Easily disassembled. I rebuilt mine - it was, I think, a dual one. The box is one of the two cap's terminals and is grounded.
You need your chassis pic with numbering like the one 20 has, and then just check against the BOM.
#8

In the second post is the picture of the chassis with numbers However the caps are not pictured on it. My guess is one is cap 46 a dual .25 filament bypass since it appears to be across the filaments. The other one is a single cap however i do not know which number it is.
#9

In Philco 20 it was dual 0.25uF and single 0.5uF.

Possibly yours have some numbering on them.

If yes - this is your source.

http://philcorepairbench.com/metalcap.htm
#10

no numbers which is why I was asking the question.
#11

Well, figure out where the wires go, trace them in the schematic and see the listed values.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
New Philco Repair Bench
Morzh is correct. The repair bench on our website is an archived image of chuck’s original site. He no longer provides s...klondike98 — 05:32 PM
Made mistake & did not label connection
Excellent information. It is all starting to come together now and your explanation really helped since I noticed that ...georgetownjohn — 04:39 PM
Made mistake & did not label connection
Hi John, I don't have this radio, but I can supply some info: Based on your pic, pins 7,8 and 1 are used together, go...MrFixr55 — 02:02 PM
New Philco Repair Bench
As far as I know, the Repairbench does not work, and has not been working in a while. Chuck (we had that campaign looki...morzh — 01:33 PM
Radio city products 664 schematic request
Need a schematic or manual for the 664. The 663 may be similar.daveone23 — 12:38 PM
New Philco Repair Bench
Thanks Gary.dconant — 12:16 PM
New Philco Repair Bench
I tried accessing the site through our library and got the same response. It's reported to our tech gurus. GaryGarySP — 11:50 AM
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM

[-]
Who's Online
There are currently 5029 online users. [Complete List]
» 1 Member(s) | 5028 Guest(s)
Avatar

>