Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Chairside Using Howard's Restor-A-Finish
#1

I had never tried Howard's Restor-A-Finish before today so thought I would show some before and after shots of my results. I recently picked up a Philco chairside with some damage to the finish on top. I bought some Howard's in walnut color and proceeded to first clean the top with GoJo (non-pumice) hand cleaner. Once that dried, I wiped that off and moved onto the Howard's using the directions on the can. I first applied it using some cloth but soon realized that the 0000 steel wool would probably work better since there were several white rings that needed to be removed. After thoroughly wiping it off, I am very pleased with the results. It is by no means perfect but a definite improvement. I am going to buy some Howard's Feed-N-Wax and apply that also to further enhance and protect the finish. My wife was threatening to "get rid of that ugly thing" so Howard's did buy me a little time. I am very pleased with the product and its ease of application.

Craig R.


Attached Files Image(s)
       
#2

Looks nice... a Big difference.
#3

+1
Much better. Time for some new rings!

Tim
#4

Looks good. I tried some Feed-n-Wax for the first time last week after a Howard's treatment and was pretty impressed. I picked my bottle up at Home Depot if anyone wants to try some.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"




Users browsing this thread:
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently 2910 online users. [Complete List]
» 1 Member(s) | 2909 Guest(s)
Avatar

>