I finally finished my 66B
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
The electronics were done this winter, including all of the Bakelite blocks (thanks to many tips from Phorum members). I've been waiting for some nice weather to finish the cabinet.
I had to replace the veneer on both sides and the top. I finished it with Mohawk toners. Medium Brown Walnut and Van Dyke Brown for the trim. The grill cloth is a repro that is somewhat close to original.
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 1,521
Threads: 240
Joined: Sep 2012
City: West Bend, Wisconsin
Looks great, Eric. Well done. I think that is the same grill cloth I used on my 1935 model 89B.
Greg V.
West Bend, WI
Member WARCI.org
Posts: 4,109
Threads: 311
Joined: Nov 2013
City: Kings Park NY
B-E-A-utiful job, veneer is perfectly flat and looks original. where did you get the veneer and what type is it? paper backed?
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Thanks guys.
Kirk,
The veneer is from Rockler . It is pressure sensitive. No messing with glue, etc.
I've used it before and have always had great results.
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Eric
Great looking radio.
I have mine 66 to attend to (a different cabinet though).
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
Great looking radio Eric, well done!
Gregb
Posts: 201
Threads: 26
Joined: Dec 2005
City: Morris Plains, NJ
VERY nice work, Eric!
Those Rockler veneers are very easy to use and yield great results.
Pete AI2V
Posts: 395
Threads: 33
Joined: Jul 2013
City: Horsham, PA
Eric,
You did a beautiful job on the cabinet. It it plays half as well as it looks, then you have one heck of a radio.
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Thanks, it sounds great hooked up to my long wire antenna. Now I just have to find a place to put it!
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 736
Threads: 26
Joined: Jun 2013
City: Hayward, California
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Great job Eric. Really sharp looking. Have to look into that type of veneer. Looks like the way to go.
Posts: 778
Threads: 48
Joined: Feb 2013
City: Shenandoah,
State, Province, Country: Pennsylvania
Wow Eric that is beyond beautiful, simply flawless!
Ron
Bendix 0626. RCA 8BX5. RCA T64
Philco 41-250. Philco49-500
GE 201. Philco 39-25
Motorola 61X13. Philco 46-42 Crosley 52TQ
Philco 37-116. Philco 70
AK 35 Philco 46-350
Philco 620B. Zenith Transoceanic B-600
Philco 60B. Majestic 50
Philco 52-944. AK 84
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Thanks everyone. It means a lot coming from my peers.
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 4,369
Threads: 410
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Super Deluxe!
Paul
Tubetalk1
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Users browsing this thread:
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM |
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
Who's Online
|
There are currently no members online. |
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|