Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Aww! What a cute wittle wadio!
#1

I picked this Philco 41-225 up at the AHRS today for $10. It's going to need a little work, a new cord and such.  The speaker's caved in, but the veener is very nice. A little GOJO and I'm sure it will clean up nicely. I blasted all the dust out of it with some canned air.


Attached Files Image(s)
   

Slave to an RCA Victor CTC-25
#2

Took me a while. Widdle means urinating .....?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

(05-03-2015, 12:45 AM)morzh Wrote:  Took me a while. Widdle means urinating .....?

Widdle is Baby Talk for "Little" Icon_lol
#4

Or, ...

"widdle wadio" is Elmer Fudd-speak for "little radio".

Icon_smile

--
Ron Ramirez
Ferdinand IN
#5

This is the smallest Philco I have. Hence, it is a baby.

Slave to an RCA Victor CTC-25
#6

Mike its "piddle" silly Ruski!

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#7

You know you could have bot that on Ebay for 100.00! That little set could look slick. Pushbuttons look OK and it has call letters too. It is the right size for about a wall full of say like 50 small Philcos. Good luck.

Paul

Tubetalk1
#8

    This thing's speaker is toast. Does anyone know the power and resistance for it and where I can get a new one? How much does reconing cost?

Slave to an RCA Victor CTC-25
#9

Well the original FC is 500 ohms which is pretty low. I suspect that's done so there isn't much voltage drop across it. What most later AC/DC set use is a 1000 to 1500 ohm resistor @ 5W. When don't have the FC in the circuit you will need to up the value of the filter caps. The FC provides some filtering the resistor not so much. So replace those with 47mfd @160v. This will give you a nice clean power supply.
As for the recone I'd guess about $45.
Terry
I see you got a local set it's got WSM on it.
Kirk, HaHa very funny!!!!!
#10

The current electrolytics are a Cornell Dublier dual cap at 30 and 50 mfd and 150 volts.

Slave to an RCA Victor CTC-25
#11

(05-03-2015, 09:57 AM)OldRestorer Wrote:  Mike its "piddle" silly Ruski!

Kirk

Though It is a UK version, but it is also what I said.

VerbEdit

widdle (third-person singular simple present widdlespresent participle widdlingsimple past and past participle widdled)
  1. (chiefly UK) To urinate


People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#12

Thought you did that with a pocket knife and a stick. Didn't know they did it in the UK.

The CD cap is replacement. Original was a dual 20mfd 150v.
Terry
#13

(05-03-2015, 12:30 PM)morzh Wrote:  
(05-03-2015, 09:57 AM)OldRestorer Wrote:  Mike its "thepiddle" silly Ruski!

Kirk

Though It is a UK version, but it is also what I said.

VerbEdit

widdle (third-person singular simple present widdlespresent participle widdlingsimple past and past participle widdled)

  1. (chiefly UK) To urinate


English isnt so simple is it?  ; )
#14

Nope. That is, simple enough but since we are separated by the common language that complicates things just a smidge.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#15

(05-03-2015, 02:52 PM)morzh Wrote:  Nope. That is, simple enough but since we are separated by the common language that complicates things just a smidge.

Yea, it doesnt help with all the "slang" terms we all come up with either.




Users browsing this thread: 8 Guest(s)
[-]
Recent Posts
Made mistake & did not label connection
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM
Made mistake & did not label connection
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM
Made mistake & did not label connection
Hello John, I have been there either label got lost or was not labeled ! Sincerely Richardradiorich — 02:15 PM
Made mistake & did not label connection
Sorry, it is a Philco 37-640.  Does that help?--Johngeorgetownjohn — 02:14 PM
two videos to watch VHS and history of TV
Hello Every, Here are a couple videos right up my alley VHS and the history of Television . history of VCR VHS Hi...radiorich — 02:13 PM
Made mistake & did not label connection
You haven't given us the model number of the set so I looked up the 6A8 pin assignment. Pin 8 is the cathode and pin 7 i...RodB — 01:19 PM
Made mistake & did not label connection
Happy Thanksgiving all! I have made a real bonehead mistake this time. Hope someone can help.  I am trying to determi...georgetownjohn — 12:51 PM
New Philco Repair Bench
Apparently there is a new Philco Repair Bench found at https://philcoradio.com/repairbench/ When I try to go to order a ...dconant — 12:00 PM
Philco 60 Squealing
Well, a wave trap is a trimmer in series with the coil so at the resonant frequency it provides a short to ground. This ...RodB — 10:07 AM
Philco 60 Squealing
Rod, My radio is run 7. The wave trap is on that schematic as shown in the picture. dconant — 09:21 AM

[-]
Who's Online
There are currently 5985 online users. [Complete List]
» 1 Member(s) | 5984 Guest(s)
Avatar

>