Posts: 112
Threads: 36
Joined: May 2015
City: Brandon, SD
I just picked up a model 20 console for $40. The cabinet is kind of rough and has been painted but it is complete right down to the grille cloth which unfortunately has a tear in it. My question is how rare is the Model 20 console vs the cathedral? I was also wondering if the chassis and speaker out of it are a direct fit into the cathedral cabinet? If they aren't that rare I would like to find a cathedral cabinet to put the chassis in, unless they are super rare and it is deserving of a top shelf resto.
Posts: 16,508
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
There was 340,000 cathedrals and 70,000 of plain grill lowboy plus 16,500 of latticeworked lowboy, so you draw the conclusions. Yes the chassis and the speaker are the same.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 112
Threads: 36
Joined: May 2015
City: Brandon, SD
Does the plain grille work mean it's the one that looks like it's frowning at you?
Posts: 16,508
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Yes. I have the other one, it is rarer.
In our neck of the woods they do not pop up much at all, either one.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 384
Threads: 22
Joined: Mar 2015
City: Waxahachie, TX
I picked a Philco 20 Lowboy a couple of weeks ago with a decent cabinet and a very good chassis. Paid $60 for it.
See here:
http://philcoradio.com/phorum/showthread.php?tid=12361
Crist
(This post was last modified: 06-22-2015, 08:59 AM by Crist Rigotti.)
Posts: 4,896
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
(06-21-2015, 10:32 PM)sdradioman Wrote: I just picked up a model 20 console for $40. The cabinet is kind of rough and has been painted but it is complete right down to the grille cloth which unfortunately has a tear in it. My question is how rare is the Model 20 console vs the cathedral? I was also wondering if the chassis and speaker out of it are a direct fit into the cathedral cabinet? If they aren't that rare I would like to find a cathedral cabinet to put the chassis in, unless they are super rare and it is deserving of a top shelf resto.
I would leave the console alone since it sounds like it;s the rarer version and just find a complete cathedral model 20 elsewhere as they turn up fairly regularly. There you have two choices, the plain brown wrapper early version, or the more elaborate late version with the figured maple arch on the front. You could also buy one with a damaged cabinet and buy a reproduction cabinet, or parts, from Steve, and decide which version you like.
Regards
Arran
(This post was last modified: 06-22-2015, 03:28 AM by Arran.)
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Steve makes some d**n fine repops!!!!
Posts: 16,508
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Does he make 20s too?
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,411
Threads: 72
Joined: Oct 2007
City: Linn Creek, MO
Not yet.
Steve
M R Radios C M Tubes
Posts: 16,508
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Thought so. That's why I asked.
So Radioman can count only on finding existing cabinet. I have not seen many. That is, I saw none, so far.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 112
Threads: 36
Joined: May 2015
City: Brandon, SD
Sorry I haven't posted for a while, my graphics card went out of my computer. So I picked up this model 20 console. It is complete and the chassis is in fair shape with only a couple small spots of rust. The speaker is in great shape. I have a question though. Did they come from the factory with a back on them? The one I bought has a back on it and it appears that it possible could be original, or someone in the past built a excellent cover. It in no way looks like a cheap handmade piece. Can anyone varify if they did or didn't come with one?
Posts: 5,170
Threads: 274
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
How about a picture? Thanks.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Model 20 consoles did not originally have backs on them.
--
Ron Ramirez
Ferdinand IN
Posts: 112
Threads: 36
Joined: May 2015
City: Brandon, SD
Ok, I will pitch it then. Thanks for the info Ron!
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco model 38 code 121 not receiving signal.
|
| I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM |
|
Philco model 38 code 121 not receiving signal.
|
| It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM |
|
Philco model 38 code 121 not receiving signal.
|
| I've reinstalled the coil. Now IT'S ALIVE!!!!!!
I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM |
|
Philco model 38 code 121 not receiving signal.
|
| Yes, Walmart, right up there with Fluke.RodB — 11:00 AM |
|
PT 6 chassis screws size???
|
| it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM |
|
Philco model 38 code 121 not receiving signal.
|
|
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM |
|
Philco model 38 code 121 not receiving signal.
|
| Thankyou for the kind words sir.
I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM |
|
PT 6 chassis screws size???
|
| Hello bridKarl,
that sounds right or maybe 8/32 .
Sincerely Richardradiorich — 01:00 AM |
|
PT 6 chassis screws size???
|
| Have this done except for missing chassis screws.
It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM |
|
Who's Online
|
There are currently 1137 online users. [Complete List]
» 3 Member(s) | 1134 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
