Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Zenith 10-H-571 "Spinet"
#32

(01-12-2017, 11:24 AM)morzh Wrote:  .....This brought the total order to $140 whereas it'd be more like $40 otherwise.  But then again, I prefer to have a stash of parts available for the future so no regrets.

We used to go to hamfests and buy up epoxy capacitors by the box load.... at the end of the day we'd divide them up by handfuls.  I also used to buy new Sprague Orange Drops by the hundreds from a supplier up in Cincinnati or Dayton and then we'd divide those up too.  Saved a lot of money that way and I still have a pretty good stock of caps for sets from around the 30's.

I did have to place an order with Mouser recently for all of the electrolytic caps in my Royal 7000 Transoceanic that I hope to get to pretty soon.

Looks like all of those paper caps are original so it'll look nice if you decide to restuff them.  I was looking for some brown hot glue sticks yesterday but couldn't find any.... they used to be easy to find.  I did buy some that are amber colored made for wood that won't look too bad restuffing paper caps.  Looks like I'll need to hit Amazon or eBay if those aren't dark enough.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"


Messages In This Thread
Zenith 10-H-571 "Spinet" - by morzh - 01-07-2017, 07:54 PM
RE: Zenith 10-H-571 "Spinet" - by sam - 01-07-2017, 07:58 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-07-2017, 08:18 PM
RE: Zenith 10-H-571 "Spinet" - by KCMike - 01-07-2017, 08:47 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-07-2017, 09:34 PM
RE: Zenith 10-H-571 "Spinet" - by Paul Philco322 - 01-07-2017, 10:30 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-07-2017, 10:55 PM
RE: Zenith 10-H-571 "Spinet" - by Jayce - 01-08-2017, 12:14 AM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 12:27 AM
RE: Zenith 10-H-571 "Spinet" - by Jayce - 01-08-2017, 01:14 AM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 10:53 AM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 08:55 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 09:34 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 09:54 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 09:55 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 10:34 PM
RE: Zenith 10-H-571 "Spinet" - by Jayce - 01-08-2017, 11:22 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 11:35 PM
RE: Zenith 10-H-571 "Spinet" - by Arran - 01-09-2017, 05:23 AM
RE: Zenith 10-H-571 "Spinet" - by KCMike - 01-08-2017, 11:48 PM
RE: Zenith 10-H-571 "Spinet" - by Jayce - 01-09-2017, 01:36 AM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-09-2017, 09:37 AM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-10-2017, 10:04 AM
RE: Zenith 10-H-571 "Spinet" - by Arran - 01-13-2017, 01:12 AM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-11-2017, 12:13 AM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-11-2017, 04:28 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-12-2017, 11:24 AM
RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 01-12-2017, 12:58 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-12-2017, 06:06 PM
RE: Zenith 10-H-571 "Spinet" - by TV MAN - 01-12-2017, 06:58 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-12-2017, 11:20 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-13-2017, 10:22 AM
RE: Zenith 10-H-571 "Spinet" - by Arran - 01-14-2017, 03:45 AM
RE: Zenith 10-H-571 "Spinet" - by Phlogiston - 01-13-2017, 12:18 PM
RE: Zenith 10-H-571 "Spinet" - by Mondial - 01-14-2017, 01:47 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-14-2017, 08:15 PM
RE: Zenith 10-H-571 "Spinet" - by Paul Philco322 - 01-14-2017, 10:11 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-14-2017, 10:46 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-23-2017, 10:04 AM
RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 01-23-2017, 10:59 AM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-23-2017, 11:12 AM
RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 01-23-2017, 08:54 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-23-2017, 10:01 PM
RE: Zenith 10-H-571 "Spinet" - by Phlogiston - 01-26-2017, 01:30 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-26-2017, 03:14 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 01-27-2017, 07:14 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 02-11-2017, 10:43 PM
RE: Zenith 10-H-571 "Spinet" - by Mondial - 02-12-2017, 03:15 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 02-12-2017, 09:22 PM
RE: Zenith 10-H-571 "Spinet" - by KCMike - 02-12-2017, 09:48 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 02-12-2017, 10:30 PM
RE: Zenith 10-H-571 "Spinet" - by KCMike - 02-12-2017, 11:00 PM
RE: Zenith 10-H-571 "Spinet" - by KCMike - 02-24-2017, 01:16 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 02-24-2017, 02:27 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 02-26-2017, 11:39 PM
RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 02-27-2017, 12:43 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 02-27-2017, 01:30 PM
RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 02-27-2017, 03:02 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 02-27-2017, 03:39 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 02-27-2017, 05:19 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-06-2017, 12:28 AM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-11-2017, 05:04 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-11-2017, 05:30 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-11-2017, 06:23 PM
RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-11-2017, 10:54 PM
RE: Zenith 10-H-571 "Spinet" - by klondike98 - 03-11-2017, 11:02 PM
RE: Zenith 10-H-571 "Spinet" - by OldRestorer - 03-12-2017, 07:39 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-12-2017, 08:41 PM
RE: Zenith 10-H-571 "Spinet" - by OldRestorer - 03-12-2017, 09:04 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-12-2017, 11:03 PM
RE: Zenith 10-H-571 "Spinet" - by Arran - 03-13-2017, 12:26 AM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-13-2017, 10:30 AM
RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 03-14-2017, 11:59 AM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-14-2017, 06:57 PM
RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-14-2017, 08:29 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-14-2017, 08:36 PM
RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 03-14-2017, 08:42 PM
RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-14-2017, 08:46 PM
RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 03-14-2017, 08:56 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-14-2017, 09:45 PM
RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-14-2017, 10:40 PM
RE: Zenith 10-H-571 "Spinet" - by OldRestorer - 03-15-2017, 08:04 AM
RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 03-15-2017, 12:02 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-15-2017, 08:16 AM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-15-2017, 07:43 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-19-2017, 09:53 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-20-2017, 11:11 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-25-2017, 05:57 PM
RE: Zenith 10-H-571 "Spinet" - by Arran - 03-26-2017, 10:46 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-25-2017, 07:21 PM
RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-25-2017, 09:31 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-25-2017, 09:44 PM
RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-25-2017, 10:28 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-26-2017, 01:51 PM
RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-26-2017, 07:50 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-26-2017, 08:57 PM
RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-26-2017, 10:06 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-26-2017, 10:15 PM
RE: Zenith 10-H-571 "Spinet" - by morzh - 03-26-2017, 11:14 PM



Users browsing this thread: 4 Guest(s)
[-]
Recent Posts
12' Philco
If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel. Kareem would have an e...morzh — 01:48 PM
12' Philco
And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM
Hickok AC51 tube tester
I think they have only shown the secondaries of the transformer. Two of them feed the rectifiers' filaments.morzh — 12:58 PM
IF can wire size and Rubber mounts?
Arran If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM
12' Philco
Rod, Yes, I know, but the Giant Philco is not around anymore either, so I go by whoever was alive fairly recently. H...morzh — 12:54 PM
Hickok AC51 tube tester
Absolutely no one is going to reverse engineer that circuit. Even the iron core is missing.RodB — 10:37 AM
IF can wire size and Rubber mounts?
Thanks to both members for your help regarding wire and tuner mtg supports. regards--Johngeorgetownjohn — 09:33 AM
Hickok AC51 tube tester
Note that no power cord, power switch, or power transformer switch are shown. That (along with my experience with full s...DaleHCook — 07:09 AM
IF can wire size and Rubber mounts?
A pair of wire strippers can give you an idea of what the existing gauge of the wire leads are in the IF can, I think it...Arran — 06:07 AM
My last cabinet for this year
Hello Dan, That is really beautiful what great looking radio you have ! I have friends who live in Calgary and the wea...radiorich — 01:51 AM

[-]
Who's Online
There are currently no members online.

>