The list of my radio & TV collection!
Posts: 661
Threads: 23
Joined: Nov 2014
City: Svalyava. Transkarpatia
State, Province, Country: Ukraine
I will continue the story about the radio receivers of the radio factory named after Kazicki ... In the first postwar years, the cooperation of the Ministry of Radio Industry of the USSR with the American company RCA continued. And the first joint development was a 12-tube radio model Leningrad 46, released in 1946. . In the design and construction of this radio, RCA experts will immediately see the RCA style))  The receiver has 6 bands and a bandwidth of up to 19 meters. Unfortunately in my collection there is no this model, this is a photo of someone else's radio.
my collection there is a later model Leningrad 48. From the previous one it differs only in the absence of fixed settings buttons, a simplified circuit and an extended range of received waves up to 16 meters. In the receiver there were only 11 radio tubes
Sorry, it has not been restored yet ..
Messages In This Thread
RE: The list of my radio & TV collection! - by RadioSvit - 06-11-2017, 02:32 PM
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
Philco Model 38-7: what caps & resistors do fail typically?
|
Hello Martin,
Welcome aboard our little community what great Model 38-7
Sincerely Richardradiorich — 12:30 AM |
Philco Model 38-7: what caps & resistors do fail typically?
|
Welcome to the Phorum Martin.
I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM |
Part numbers to model cross
|
Jim,
We have this index put together by Dale Cook but I don't think that is quite what you are looking for.
The Parts...klondike98 — 09:37 PM |
Philco Model 38-7: what caps & resistors do fail typically?
|
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM |
Philco 42-345 Restoration/Repair
|
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM |
Philco 42-345 Restoration/Repair
|
What does the resistor measure? I think it should be 3.3 Meg.
If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM |
Philco Model 38-7: what caps & resistors do fail typically?
|
Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM |
Philco 42-345 Restoration/Repair
|
I have that same set, ain't too much shortwave I like anyway.....it is a good AM DX set. PaulPaul Philco322 — 08:32 PM |
Philco Model 38-7: what caps & resistors do fail typically?
|
Welcome to the Phorum, Martin! Open a new thread in Philco Electronic Restoration when you begin working on your 38-7. ...GarySP — 08:28 PM |
Philco Model 38-7: what caps & resistors do fail typically?
|
Welcome to the Phorum!
:wave:
Here's the schematic for that radio from our digital library:
Something to do bef...klondike98 — 08:05 PM |
Who's Online
|
There are currently no members online. |
|

|