06-17-2010, 09:11 AM
[Image: http://i326.photobucket.com/albums/k420/...C01321.jpg]
This wire goes under the chassis to the band switch, to the wafer section closest to the end of the chassis, down underneath. I could not make out exactly what terminal the wire goes to, sorry. As shown in the photo below, you can't even see the wire coming through the hole:
[Image: http://i326.photobucket.com/albums/k420/...C01323.jpg]
Looking at the schematic, I see that the wire goes to terminal 12D. Wafer D is closest to the end of the chassis, and terminal 12D would be on the bottom (of course!).
This wire goes under the chassis to the band switch, to the wafer section closest to the end of the chassis, down underneath. I could not make out exactly what terminal the wire goes to, sorry. As shown in the photo below, you can't even see the wire coming through the hole:
[Image: http://i326.photobucket.com/albums/k420/...C01323.jpg]
Looking at the schematic, I see that the wire goes to terminal 12D. Wafer D is closest to the end of the chassis, and terminal 12D would be on the bottom (of course!).
--
Ron Ramirez
Ferdinand IN
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
