11-23-2010, 12:13 AM
So the cabinet restoration is pretty much complete.... I figured i would tackle the part that i am comfortable with first. I ended up stripping the whole cabinet with lacquer thinner and steel wool. The Photo finish was pretty much toast before i started Rather than use the printed paper technique, I opted to actually use real walnut burl veneer I came out pretty well, but have a couple of small questions before I finish up. I am starting on the electronics and will post into that category as well
When replacing the "Philco" decal do you topcoat it with lacquer?
What color screws were used to attach the faceplate
There is a "L" shaped metal bracket that needs to be transferred from the old faceplate to the new. What's the best way to attach it?
that topic as well[attachment=0]
When replacing the "Philco" decal do you topcoat it with lacquer?
What color screws were used to attach the faceplate
There is a "L" shaped metal bracket that needs to be transferred from the old faceplate to the new. What's the best way to attach it?
that topic as well[attachment=0]
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
