05-15-2024, 08:43 PM
Hi guys, I had the same issue with the bezel on my 41-221. I used a jewelers screwdriver and a small flat blade screwdriver to get under the clip next to the center. Work one side then the other. It will slowly get looser. I removed all six this way. The main thing is to use a short screwdriver with the thinnest blade.
For the round clips I use a spring hook to hook the center teeth at the post and pull up at the center, working one side then the other.
For the round clips I use a spring hook to hook the center teeth at the post and pull up at the center, working one side then the other.