10-22-2025, 11:12 PM
Looking at the attached schematic, the shadow meter (#66) should be attached to the bottoms of the 1st and 2nd IF transformer's Primary windings (#23 & #27).
Also, have you measured the resistance of the shadow meter? I think it should be somewhere around 850 ohms.
If the resistance is correct, I would check the voltages (see attached) and possibly realigned the radio with the shadow meter in the circuit.
Also, have you measured the resistance of the shadow meter? I think it should be somewhere around 850 ohms.
If the resistance is correct, I would check the voltages (see attached) and possibly realigned the radio with the shadow meter in the circuit.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
