Posts: 16,250
Threads: 564
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I acquired this one about three years ago. Went to Massachusetts to pick it up.
Now it's number is up, I decided to give it the resto session.
It is in good shape, fairly clean. The grillcloth is missing but the cone is near mint. And I had ordered the herringbone Kenny recommended. From Kenny. 
The chassis is on my bench now.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
come on mike that's the cleanest work area I have ever seen 
and it`s about time you get to that
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 16,250
Threads: 564
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I have just vacuumed it after the mess Kirk has left here
One more feature: it has the old FM band. Not sure what to do with it. It's useless today. Building the converter is not my plan.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
I have one of those Mike. I've Been walking by it for the last year. Look forward to your restoration and what you encounter.
Posts: 16,250
Threads: 564
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Mike
One thing I noticed, the external wiring uses the infamous rubber coated wire and it is ... molting
Other than that, console Zeniths, as most large chassis single-storeyed jobs, don't present many inconveniences while working on them. I hope the transformer is good, as other things are fairly simple. I had to rewind an RF choke on the 9S262 I did 4 years back, it wasn't too bad.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 4,408
Threads: 415
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Those are pretty nice looking, some say too much with the spindles and cut out on front but I like em..
Good luck.
Paul
Tubetalk1
Posts: 16,250
Threads: 564
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Matter of taste, Paul, matter of taste. I like it. Else I wouldn't go all the way yo Plymouth Mass to get it.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,031
Threads: 367
Joined: Jun 2010
City: Dover, OH
The Zenith Spinet is one radio I would gladly still welcome into my collection if I could find one. I found a few four years back, but people here think they are worth a fortune. Now with the stupid maker's movement, I fear these neat radios might be prime targets for wine rack or i-pod dock conversion. 
No matter where you go, there you are.
Posts: 16,250
Threads: 564
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
There's one in OH right now for $695. Crazy price, bought mine for 200.
But it has the offer option and it's been there awhile and it won't sell any time soon at this price.
http://www.ebay.com/itm/1941-VINTAGE-Zen...SwImRYcZjg
And another one
http://www.ebay.com/itm/Antique-Zenith-C...SwtpZYSYNH
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,031
Threads: 367
Joined: Jun 2010
City: Dover, OH
Wow, they are both high and I really don't have much money to play with since spending $180 on tires for the van yesterday. Also, no paypal.. Akron isn't far from me, but I have never heard of Sylvania, Ohio. Now I have to look that up!
No matter where you go, there you are.
Posts: 16,250
Threads: 564
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Overseas? They make good swords over there.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 16,250
Threads: 564
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Here's a question. Riders does not have the sch. The sch has external b!ocks and some pieces but no full sch or chassis drawing.
There is 10H571R but I am not sure it is the same, plus the chassis is different.
Does anyone have the docs for this one or a link I could follow?
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
did you Google it,,,because it comes up in Antigue radio forum ,,, article ---schematic
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
Antique electronic supply has it ,,,copy the display,,,,found under google,,,CHEERS
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
Philco 91 Restore Code ??
|
| Hello Mike,
Yes, I have 3 Fluke meters one being my first Fluke 77 and other being Fluke 87.
My third is Fluke clamp -...radiorich — 05:04 PM |
|
Philco 91 Restore Code ??
|
| I knew that Fluke was the Cadillac so with that in mind what Fluke would you recommend I get?dconant — 03:53 PM |
|
Philco 91 Restore Code ??
|
| Yep. 10W is probably enough.
Also, if the meter measures Farads, then it should also have that "Delta" button...morzh — 02:38 PM |
|
Philco 91 Restore Code ??
|
| I measured the current through the resistor I am using as a replacement for the speaker field coil and got 40ma. So that...dconant — 02:32 PM |
|
Philco 91 Restore Code ??
|
| No I'm not saying I don't own a DMM. I have a CCC one (Thsinde 18+). I forgot that could read caps. I did purchase a Flu...dconant — 02:28 PM |
|
Philco 91 Restore Code ??
|
| Are you telling me you do not own any decent DMM, that can measure capacitances from a few pF and up? Even todays CCC (C...morzh — 01:44 PM |
|
Restoring Philco 96
|
| Well, selectivity today, with stations disappearing, is not such a problem for TRF as it likely used to be.
Although wh...morzh — 01:42 PM |
|
Philco 91 Restore Code ??
|
| Mike I did that already and can't really get any kind of reading. My little Honeytek A6013L reads 0 on all scales. One s...dconant — 01:38 PM |
|
New member
|
| Well, to be frank, when it comes to radios, especially the older types, a person with no electronic background could be ...morzh — 01:33 PM |
|
Restoring Philco 96
|
| Thanks for mentioning the video you had uploaded. Somehow I missed that post. Just watched your video, and it sounds to ...jrblasde — 01:28 PM |
|
Who's Online
|
There are currently 3162 online users. [Complete List]
» 2 Member(s) | 3160 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
