Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

66B (looks like a MB)
#1

Time to have a look at this cabinet, but I have a question. Was this 66 cabinet available w/o the black accents on the trim? I realize that this one has been stripped.


Attached Files Image(s)
           

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#2

(11-02-2017, 05:04 PM)Radioroslyn Wrote:  Was this 66 cabinet available w/o the black accents on the trim?

No. At least, not from the factory.

--
Ron Ramirez
Ferdinand IN
#3

Thanks just wanted double check to be sure.
Gluing up a joint or two and then it's time for
David Rose and his orchestra to start playing.
https://www.youtube.com/watch?v=5bLX06yR3wY

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#4

That decal looks like a balloon script!
I will get to my 66MB one day.. Icon_lol

Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#5

I'm surprised Ron didn't tell me it was the wrong font  [Image: http://philcoradio.com/phorum/images/smi...on_lol.gif].
Obtw found ur leg.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#6

Awesome!
I cant stand it tipping back every time I touch it.
Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#7

Still working on the 66B cabinet and hope have it clear coated Monday or so. While I was working onthe 66B I pulled out the old 39-80. The finish was really rough on it so it got the same treatment as the 66B but it was easier to work on . Just waiting for it to cure before a rubdown.


Attached Files Image(s)
       

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#8

Very nice Terry. Icon_thumbup
#9

Did the grain filling a couple of days ago but wasn't happy with the results. It made the fnt look too dark. Sanded it out and got it looking much better. Got it all toned and edges painted black but manged to sand though the toner on the top so have to go back over that. Then on to a few coats of sealer, sanding, and gloss. Oh still have the wooden top/front trim and wooden dial escutcheon.


Attached Files Image(s)
   

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#10

So I think I'm done w/it till it's time to polish it out. I didn't glue and nail the trim back on as it will make it more difficult to polish. The grille cloth is from a 60MB as is the trim, it was badly damaged from the previous cabinet work (sanded all most flat). Didn't really like it so much when I was refinishing it but it's starting to grow on me.

Is the rumor true that radio collectors after a long time start to look like their sets???


Attached Files Image(s)
       

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#11

Very nice, Terry.
Kirk should be getting nervous. Icon_lol

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#12

It's just four less sets I'll have to bug him about  [Image: http://philcoradio.com/phorum/images/smi..._lolno.gif].

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#13

I like it!
Icon_clap Icon_clap Icon_clap




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
HiFi (Chifi) tube amp build - but my own design.
And so does a barber shop quartet. mmmmmmRodB — 03:54 PM
Shadow Meter Bulb
I did try an LED bulb in place of the original but wasn't impressed with the amount of light on the dial. Seems like it ...RodB — 03:51 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Would mounting he transformer vertically change the hum, if used without additional parts? Also, in these amps...morzh — 02:25 PM
Shadow Meter Bulb
Gary I doubt it would introduce any noise. We use similar lamps for the panel indication, 12V AC lamps: they are LEDs...morzh — 02:15 PM
Shadow Meter Bulb
Not sure if anyone has tried this but there are 6.3 volt miniature lamps in bayonet and screw-in base options available ...GarySP — 11:31 AM
Shadow Meter Bulb
Any 6.3 volt pilot light will work. I would use the brightest one I could find in my workroom. Be sure the dial is clean...RodB — 10:45 AM
HiFi (Chifi) tube amp build - but my own design.
Tim, nice write up and thanks for sharing !! Sincerely Richardradiorich — 02:47 AM
HiFi (Chifi) tube amp build - but my own design.
Well, this was a real "Hum-Dinger" :lol: ! This will be kinda long, but hopefully it will help others having t...TV MAN — 01:55 AM
Shadow Meter Bulb
Phorum members, I am trying to find the bulb # for PHILCO Shadow Meter part number 45-2180 that is from a 37-640 chassis...georgetownjohn — 06:53 PM
Philco 41-608 changer coupler
3D-printing...short of machining, of course. Or molding.morzh — 05:20 PM

[-]
Who's Online
There are currently no members online.

>