Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Repairing a PT2
#1

I just bought a PT2 and it does not work. Two wires are disconnected; the black wire from #3 terminal on the transformer(?) and one of the white wires that comes off of the bottom speaker lug. On the speaker lug the wires that are connected are the one from #6 terminal on the transformer to the middle lug on the speaker and the other white wire on the bottom lug of the speaker is connected to a mount on the frame in the back left (looking at the rear of the radio)behind the tuner. I am new to radios and any help is appreciated!! Lastly, is there anywhere to get an original back cover for this radio, mine is missing. Thanks-E
#2

Here's the schematic for your radio:
http://www.nostalgiaair.org/PagesByModel...014125.pdf
There is a reproduction back available:
http://retro-tronics.com/itemDetails.php...28Black%29

Carl
Northern Panhandle, WV




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Made mistake & did not label connection
Hi John, I don't have this radio, but I can supply some info: Based on your pic, pins 7,8 and 1 are used together, go...MrFixr55 — 02:02 PM
New Philco Repair Bench
As far as I know, the Repairbench does not work, and has not been working in a while. Chuck (we had that campaign looki...morzh — 01:33 PM
Radio city products 664 schematic request
Need a schematic or manual for the 664. The 663 may be similar.daveone23 — 12:38 PM
New Philco Repair Bench
Thanks Gary.dconant — 12:16 PM
New Philco Repair Bench
I tried accessing the site through our library and got the same response. It's reported to our tech gurus. GaryGarySP — 11:50 AM
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean.  Can you explain what you are really saying.  If anyone does not...georgetownjohn — 08:05 PM
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM

[-]
Who's Online
There are currently 3639 online users. [Complete List]
» 4 Member(s) | 3635 Guest(s)
AvatarAvatarAvatarAvatar

>