Posts: 8
Threads: 2
Joined: Nov 2019
City: margate
State, Province, Country: florida
hi folks, I have a question for the forum. can the above model be made to work without the power transformer? if so, how would one go about it?
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
In an absolute sense - yes. But you are still going to need a power supply, probably using a transformer.
In a practical sense - no.
I take it that the original trans. is no good?
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 8
Threads: 2
Joined: Nov 2019
City: margate
State, Province, Country: florida
yes, the orig transformer was missing from the radio.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
I only took a quick look at Rider's, but, it appears that trans was used on several models. You might want to put up a WTB ad here, or there is a guy selling transformers on E-Pay - for too much $.
ARS (Antique Radio Supply) sells new transformers which are not exact replacements but often you can find an acceptable replacement. These too are not cheap.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 8
Threads: 2
Joined: Nov 2019
City: margate
State, Province, Country: florida
o.k., i guess its going back on the shelf. i really don't want to put a lot of money in this project. thanks for your response.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Best keep an eye out for a used one.
Other radios that use the same or similar tube combinations can also be a source.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
(This post was last modified: 12-19-2019, 04:49 PM by Phlogiston.
Edit Reason: eye
)
Posts: 8
Threads: 2
Joined: Nov 2019
City: margate
State, Province, Country: florida
Posts: 1,407
Threads: 72
Joined: Oct 2007
City: Linn Creek, MO
There is a classified listing on ARF https://antiqueradios.com/forums/viewtop...5&t=369280 for transformer for a 40-185, not the same part number but, probably close enough. the 40-185 has one more tube.
Steve
M R Radios C M Tubes
Posts: 8
Threads: 2
Joined: Nov 2019
City: margate
State, Province, Country: florida
i'am interested in p/t. how do i find out total cost. never pm before.
Posts: 1,407
Threads: 72
Joined: Oct 2007
City: Linn Creek, MO
Somewhere on the page is a PM button. click it ad type your message.
Steve
M R Radios C M Tubes
Posts: 8
Threads: 2
Joined: Nov 2019
City: margate
State, Province, Country: florida
thanks for the heads up steve. i bought the trans, i think.
Posts: 8
Threads: 2
Joined: Nov 2019
City: margate
State, Province, Country: florida
i,am going to be wiring up a power transformer for the above radio. do i wire the filaments directly to chassis ground?
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco 91 Restore Code ??
|
| Hello Mike,
Yes, I have 3 Fluke meters one being my first Fluke 77 and other being Fluke 87.
My third is Fluke clamp -...radiorich — 05:04 PM |
|
Philco 91 Restore Code ??
|
| I knew that Fluke was the Cadillac so with that in mind what Fluke would you recommend I get?dconant — 03:53 PM |
|
Philco 91 Restore Code ??
|
| Yep. 10W is probably enough.
Also, if the meter measures Farads, then it should also have that "Delta" button...morzh — 02:38 PM |
|
Philco 91 Restore Code ??
|
| I measured the current through the resistor I am using as a replacement for the speaker field coil and got 40ma. So that...dconant — 02:32 PM |
|
Philco 91 Restore Code ??
|
| No I'm not saying I don't own a DMM. I have a CCC one (Thsinde 18+). I forgot that could read caps. I did purchase a Flu...dconant — 02:28 PM |
|
Philco 91 Restore Code ??
|
| Are you telling me you do not own any decent DMM, that can measure capacitances from a few pF and up? Even todays CCC (C...morzh — 01:44 PM |
|
Restoring Philco 96
|
| Well, selectivity today, with stations disappearing, is not such a problem for TRF as it likely used to be.
Although wh...morzh — 01:42 PM |
|
Philco 91 Restore Code ??
|
| Mike I did that already and can't really get any kind of reading. My little Honeytek A6013L reads 0 on all scales. One s...dconant — 01:38 PM |
|
New member
|
| Well, to be frank, when it comes to radios, especially the older types, a person with no electronic background could be ...morzh — 01:33 PM |
|
Restoring Philco 96
|
| Thanks for mentioning the video you had uploaded. Somehow I missed that post. Just watched your video, and it sounds to ...jrblasde — 01:28 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
