Posts: 81
Threads: 24
Joined: Aug 2018
City: LAVERN-SUBIRATS
State, Province, Country: ESPAÑA
Good Morning,
For those who may be interested.
I have come across some cut Philco coils. I pass the data in case someone has the same problem. The repaired radios work perfectly.
PHILCO 89
PRIMARY OSCILLATOR 25 SPIRES WIRE GAUGE 39
PRIMARY RF 12 SPIRES WIRE GAUGE 39
PHILCO 37-84
PRIMARY OSCILLATOR 14 SPIRES WIRE GAUGE 39
Cheers,
Ferran
Posts: 7
Threads: 1
Joined: Dec 2018
City: WOODSTOCK
State, Province, Country: Virginia
Thank you for the information!!! Agradecido!!
Posts: 177
Threads: 19
Joined: Feb 2014
City: The Motor City,Detroit MI
Anybody know if it's the same for Philco 90? I have one in the queue with an open coil.
(This post was last modified: 06-18-2020, 11:39 AM by
Kestas.)
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
Perhaps the might be a good idea to start a section in the Library addressing models and coil rewinding? More specifically what coils and number of turns/wire ga. Members can fill in the blanks as to what they found that works.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 81
Threads: 24
Joined: Aug 2018
City: LAVERN-SUBIRATS
State, Province, Country: ESPAÑA
It is different. I am attaching you web page. There you will find the answer.
https://www.philcorepairbench.com/rewind...-rf-coils/
Posts: 81
Threads: 24
Joined: Aug 2018
City: LAVERN-SUBIRATS
State, Province, Country: ESPAÑA
Radioroslyn:
It seems perfect !!!!!!!
I wanted to propose ........
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
We need to get admin on board to make it happen.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 1,872
Threads: 212
Joined: May 2015
City: Seattle
State, Province, Country: WA
This is a great idea guys! Adding a section to the library is easy.
It would be a bit harder to allow contributions to it - I will se what I can do.
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
Could be posted here and vetted and then admin could add to the library. This would help eliminate spam and such.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
(This post was last modified: 06-18-2020, 09:23 PM by
Radioroslyn.)
Posts: 1,872
Threads: 212
Joined: May 2015
City: Seattle
State, Province, Country: WA
Here's the new Library page:
https://philcoradio.com/library/index.ph...lco-coils/
If there are any other old threads with coil details that you know about please let me know and I'll add them there as well.
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
Philco Model 600 oscillator coil:
If anyone needs the data it's primary is 125T of #36G & Secondary is 25T of #36G.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 1,872
Threads: 212
Joined: May 2015
City: Seattle
State, Province, Country: WA
Thanks Terry! Model 600 oscillator coil details added.