A rare Electrohome console made for Eatons
Posts: 370
Threads: 102
Joined: Jul 2011
City: Calgary, AB, CA
i bought this one about a week ago and it took a while to find out the exact model.
It is an Electrohome model Z8A83X-E.
I finally found the schematics from Steve Johnson. I have it recapped and playing good.
The cabinet is stripped,and the next step is grain filler
Dan in Calgary
Living in Calgary Alberta
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Nice chassis. Should be easy to work on.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 320
Threads: 30
Joined: Jul 2017
City: Hay Lakes, Alberta,Canada
Well now...that's a very interesting DE set! I've never seen one with that dial and control layout.
I don't find that model number in either the RCC or Electrohome manuals, but it's not uncommon to find unpublished schematics for Grimes/Dominion Electrohome sets when the chassis is slightly changed from a previous model. But that makes restoration more "interesting"
Posts: 1,905
Threads: 143
Joined: Jan 2013
City: Westland, MI
That's the kind of chassis I appreciate! Lots of 'elbow room' to work in. Take care and BE HEALTHY! Gary
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I was looking through the numbers on the PacificTV website, there were some that were close, but not close enough. Brad is right though, sometimes Grimes-Phonola/Dominion Electrohome would warm over a chassis for more then one model year, which is why I was looking through the previous year models. The model numbers Phonola/D-E used for their chassis did include a year, but it was the date the circuit diagrams were approved, not the year of production, usually it was a model for the following year, but not always, I've seen some that were dated around 1940, but not actually produced until 1947. I would like to know why Eatons seemingly carried two different private label brands of radio, Viking of course, and Minerva. apparently concurrently? (not to be confused with the AC/DC, line operated only, steel cased portables of the late WW2 and post war era). I have run across pictures of that console model somewhere, I have a feeling that it may have been a licensed copy of a U.S made set, a Howard perhaps?
Regards
Arran
Posts: 370
Threads: 102
Joined: Jul 2011
City: Calgary, AB, CA
I bought the schematic from Steve Johnson, and here is a copy
Dan in Calgary
Living in Calgary Alberta
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Dan;
Not a bad circuit, uses a 6K8 for a mixer-oscillator, and a proper tuned RF amplifier stage, strange that it only has three bands but then again it is a an Eaton's set.
Posts: 370
Threads: 102
Joined: Jul 2011
City: Calgary, AB, CA
Living in Calgary Alberta
Posts: 1,905
Threads: 143
Joined: Jan 2013
City: Westland, MI
Beautiful job. Dan! Take care and BE HEALTHY! Gary
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Posts: 320
Threads: 30
Joined: Jul 2017
City: Hay Lakes, Alberta,Canada
Wow Dan, amazing job! Looks great!
I wonder if that model is featured in any of the Eatons catalogs?
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Dan
Beautiful job. An eye-pleaser.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 65
Threads: 11
Joined: Nov 2021
City: Toronto
State, Province, Country: Ontario
Just for anyone looking for information on Phonola’s or Electrohome’s. The University of Waterloo was kind enough to send me Service Notes, parts lists and schematics for a couple of Phonola radios that I restored. They have this information on Electrohome/Phonola in their “Special Collections and Archives” section of their library.
Posts: 1,472
Threads: 89
Joined: May 2008
City: Omak
State, Province, Country: WA
Hello Dan,
what amazing job !
Hamilton that is great news .
Sincerely Richard
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
40-150 General questions
|
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM |
40-150 General questions
|
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM |
40-150 General questions
|
Hi Kevin,
No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM |
Philco 38-7 Speaker
|
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM |
40-150 General questions
|
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM |
Who's Online
|
There are currently 1325 online users. [Complete List] » 2 Member(s) | 1323 Guest(s)
|
|
|
|