Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Gift from FIL. sweet
#1

New guy here, and new proud member of the Philco family. Father in Law gave me this for christmas. he restored the outside, I'm responsible for the inside! lol. Look forward to the knowledge here for help with that. Picking it up at the house later in the week. Not sure of the exact model and such, or what needs doing, but I'm excited, because its beautiful.
           
#2

Looks nice ! Good luck with it.

-Bill
#3

It's either a model 18 or 118! They are both excellent 8 tube radios, main difference is the 118 has a larger shortwave band.

You have a super radio to start your Philco collection with. But beware, you will soon be a Philco addict like the rest of us!
#4

Nice Icon_thumbup

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#5

It is indeed a 118 via the lable inside. On initial inspection, there is a rip in the speaker cone, and the power cord has been cut. The power cord issue is good and bad. Bad because I have to put in a new one. But good because I was told the radio worked before the cord was cut.
#6

TA Forbes Wrote:It's either a model 18 or 118! They are both excellent 8 tube radios, main difference is the 118 has a larger shortwave band.

You have a super radio to start your Philco collection with. But beware, you will soon be a Philco addict like the rest of us!

A 118 should look like this one. I have one in the basement.
http://www.philcoradio.com/phorum/showth...p?tid=3786

Great radio you have there!

Mike

Cossor 3468
GE 417A
Philco 118H
Radiola 17/100
Scott 800B6
Silvertone 6130
Stromberg 535M
Truetone D1952

#7

Mike

You and Glenn have 118H sets. The OP's set shown above is a 118X.

http://www.philcoradio.com/gallery/1935b.htm#f

--
Ron Ramirez
Ferdinand IN
#8

I still have to read through a lot of this site. but what is the significance of the X? My unit says 118. I think I read that they leave off the X, but what is the actual change? is there a difference between a 118 and the X version?
#9

Hi Keith,
Nice set!
Just go slow on the chassis if you have not worked on one before. The cord being cut had probably saved the components from being burned, if the caps or other parts/wiring have shorted.

The cone may be an easy repair.
Good luck!
#10

keithpgdrb Wrote:I still have to read through a lot of this site. but what is the significance of the X?
Please see this page on my site:

http://www.philcoradio.com/tech/letters.htm

This will explain the significance of the letters "X", "H", "B", etc.

--
Ron Ramirez
Ferdinand IN
#11

For me "X" is what wives and girlfriends become......
#12

whew.. been a while. but I'm finally getting back to this project. So a quick question. Since the X in 118X refers to the speaker placement, I would need the 118 schematics correct?
#13

There are several code 118s but yes, getting schematics for a 118 will get you in the ballpark.
#14

updated the first post with the pictures of it at home. I was looking at the tubes, but I'm not sure if my tester can test them. I cant find the tube numbers in my Eico 667
#15

Hi All;
Keithpg, Welcome back to the Phorum..
Not only is Your tubes not listed for Your Tester, but You Do Not have any Tube Sockets for the Tubes You want to check.. These Tubes are Alot Older than Your Tube Tester.. You need a different Tube Tester for the Tubes You have..
THANK YOU Marty




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean.  Can you explain what you are really saying.  If anyone does not...georgetownjohn — 08:05 PM
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM
Made mistake & did not label connection
Maybe this is starting to make some sense in my hard head.  Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM
Made mistake & did not label connection
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM
Made mistake & did not label connection
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM
Made mistake & did not label connection
Hello John, I have been there either label got lost or was not labeled ! Sincerely Richardradiorich — 02:15 PM
Made mistake & did not label connection
Sorry, it is a Philco 37-640.  Does that help?--Johngeorgetownjohn — 02:14 PM

[-]
Who's Online
There are currently no members online.

>