Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 40-180 station call letter tabs
#1

hi! i'm new to the world of radio restoration, and am in the process of getting a 40-180 up and running again. it seems all parts are fairly easy to locate, except the call letter tabs. i have found a site that sells sheets of 300 stations (who needs that many) but no television or dial tabs. can anybody point me in the direction of a site that sells tabs sheets with a reasonable amount of stations and includes the television and dial tabs. thanks for any help.
#2

Oilchangeguy,

If you have a color printer with your computer, try using the "Paint" program to make your own. Set up a brown field and type in the call letters you want using a white font. This may take some experimentation, but the price will be right! Icon_biggrin

It's a pretty easy process...just play around until you get the results you like. Good luck!

Bill

Sent from my Pentium II on the AT&T Dial Network
#3

thanks bill, i'll give it a try!
#4

There was a previous discussion on the phorum. You might contact Chuck about a scan:
http://philcoradio.com/phorum/showthread.php?tid=169

Carl
Northern Panhandle, WV




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently 3962 online users. [Complete List]
» 1 Member(s) | 3961 Guest(s)
Avatar

>