Posts: 5
Threads: 1
Joined: Dec 2011
(This post was last modified: 09-14-2013, 03:16 PM by keithpgdrb.)
Posts: 893
Threads: 9
Joined: Mar 2008
City: Vieques, PR USA
State, Province, Country: PR
Looks nice ! Good luck with it.
-Bill
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
It's either a model 18 or 118! They are both excellent 8 tube radios, main difference is the 118 has a larger shortwave band.
You have a super radio to start your Philco collection with. But beware, you will soon be a Philco addict like the rest of us!
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
Nice
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 5
Threads: 1
Joined: Dec 2011
It is indeed a 118 via the lable inside. On initial inspection, there is a rip in the speaker cone, and the power cord has been cut. The power cord issue is good and bad. Bad because I have to put in a new one. But good because I was told the radio worked before the cord was cut.
Posts: 244
Threads: 11
Joined: Oct 2011
City: Black Mountain, NC
TA Forbes Wrote:It's either a model 18 or 118! They are both excellent 8 tube radios, main difference is the 118 has a larger shortwave band.
You have a super radio to start your Philco collection with. But beware, you will soon be a Philco addict like the rest of us!
A 118 should look like this one. I have one in the basement.
http://www.philcoradio.com/phorum/showth...p?tid=3786
Great radio you have there!
Mike
Cossor 3468
GE 417A
Philco 118H
Radiola 17/100
Scott 800B6
Silvertone 6130
Stromberg 535M
Truetone D1952
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Mike
You and Glenn have 118H sets. The OP's set shown above is a 118X.
http://www.philcoradio.com/gallery/1935b.htm#f
--
Ron Ramirez
Ferdinand IN
Posts: 5
Threads: 1
Joined: Dec 2011
I still have to read through a lot of this site. but what is the significance of the X? My unit says 118. I think I read that they leave off the X, but what is the actual change? is there a difference between a 118 and the X version?
Posts: 271
Threads: 12
Joined: Nov 2005
City: Nashville, TN
Hi Keith,
Nice set!
Just go slow on the chassis if you have not worked on one before. The cord being cut had probably saved the components from being burned, if the caps or other parts/wiring have shorted.
The cone may be an easy repair.
Good luck!
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
keithpgdrb Wrote:I still have to read through a lot of this site. but what is the significance of the X? Please see this page on my site:
http://www.philcoradio.com/tech/letters.htm
This will explain the significance of the letters "X", "H", "B", etc.
--
Ron Ramirez
Ferdinand IN
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
For me "X" is what wives and girlfriends become......
Posts: 5
Threads: 1
Joined: Dec 2011
whew.. been a while. but I'm finally getting back to this project. So a quick question. Since the X in 118X refers to the speaker placement, I would need the 118 schematics correct?
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
There are several code 118s but yes, getting schematics for a 118 will get you in the ballpark.
Posts: 5
Threads: 1
Joined: Dec 2011
updated the first post with the pictures of it at home. I was looking at the tubes, but I'm not sure if my tester can test them. I cant find the tube numbers in my Eico 667
Posts: 240
Threads: 27
Joined: Jun 2013
City: Boulder, Colorado
Hi All;
Keithpg, Welcome back to the Phorum..
Not only is Your tubes not listed for Your Tester, but You Do Not have any Tube Sockets for the Tubes You want to check.. These Tubes are Alot Older than Your Tube Tester.. You need a different Tube Tester for the Tubes You have..
THANK YOU Marty
(This post was last modified: 09-14-2013, 04:06 PM by marty.)
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
An attempt to remove the Field Coil from a G speaker
|
Mike;
I've only run into a speaker with an open filed coil twice, and they were on newer speakers from the 1940s. One ...Arran — 12:48 AM |
An attempt to remove the Field Coil from a G speaker
|
Arran
Yes, this is my plan for now and what do I got to lose, this is not even the speaker from this radio, but one o...morzh — 10:44 PM |
An attempt to remove the Field Coil from a G speaker
|
Mike;
I would unwrap the field coil, and see if maybe there a break near one of the ends, like where the coil wire att...Arran — 10:23 PM |
An attempt to remove the Field Coil from a G speaker
|
...and this is what I did. I fed a little LT into the screwholes with a small brush, and a little on the rim next to the...morzh — 09:52 PM |
Philco 40-120C Restoration
|
I combined the two 40-120C threads together as we like to keep the discussion of the same radio together. It helps with...klondike98 — 09:36 PM |
Philco 40-120C Weak, Distorted Ouput
|
Just checked were I buy tubes price is four dollars. So living in Florid we have a local source for tubes. David David — 09:14 PM |
Philco 40-120C Weak, Distorted Ouput
|
The higher voltage may be due to higher mains voltage. My mains run 120-125AC when the set was new mains would be 110-11...David — 09:09 PM |
Philco 40-120C Weak, Distorted Ouput
|
Thank you for your reply. I pulled a speaker from a Philco 41-221 and received the same result. I used a signal tracer t...bluecap — 08:45 PM |
Philco 40-120C Weak, Distorted Ouput
|
Have you tried a different speaker?
How did you trace the distortion?
How do you know it is weak? What is the reference?...morzh — 08:33 PM |
Philco 46-480 Electronic Restoration
|
Amen to that! Every time I think I’ve captured them all, I realize that there’s another error. My goal is to finish with...jrblasde — 07:00 PM |
Who's Online
|
There are currently no members online. |
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|