Philco 45 Butterfly Restoration Chronicles....Finished
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Very Punny Kenny,
Quote...
"I will say this, If you use Oven cleaner for stripper, Gojo for a wood moisturizer , Howard's "Ignore a finish", or Polyurethane. And you are satisfied with these ?,.. then you won't be needing my help, I don't practice those applications."
Yeah I am not a fan of those ideas. Never tried oven cleaner but I like to hand sand most of the time unless there are detailed pieces or legs..
UGH legs stink,
I just finished collecting and placing every piece of old veneer and will glue today after some appts. Only missing a few pieces though. I think I may need to go very dark on the finish, like black toner due to water stains and very dark spots.
Attached Files
Image(s)
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 5,071
Threads: 269
Joined: Nov 2012
City: Bandon
State, Province, Country: OR
Kenneth, thanks for the offer for advice on cabinet restoration!
Posts: 15,527
Threads: 545
Joined: Oct 2011
City: Jackson, NJ
So you are gonna use this painted veneer?
Isn't it easier to get a new one and finish it according to specs?
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
I want it as original as possible and will strip the veneer once secured to the new top and front.
I got the new veneer but I dont know.
Hmmmmmmmmm
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 1,114
Threads: 14
Joined: Feb 2013
City: Irvington, NY
If you have already gone to all the trouble of making the new front, you may as well finish it with new veneer.
Since you are missing pieces and the old veneer is painted in addition, it seems it will never look as good as if you completely replace it.
See what Kenny recommends?
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
New issue,
I am currently waiting for the veneer to dry but I have noticed something. The front bottom does not have the angled trim. It is completely flat...
Is this another piece I have to fabricate? It doesn't even look like someone cut it. Could the front trim have fallen off?
Thanks
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Well the glue finally dried and I removed the planer and the table. It came out nice and flat, thank gosh!
Sanded it down, replaced the missing veneer I didn't have, then added the decorative raised veneer. Then I cut out the vent holes in the new top veneer and done for the day
Now it is again a waiting game:
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
(This post was last modified: 02-01-2014, 06:25 PM by
OldRestorer .)
Posts: 411
Threads: 42
Joined: Sep 2008
City: Ironton Ohio
Looks great, im glad to see someone besides myself that would save a cabinet in such bad shape rather than trash it.
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Ok so cabinet now has a bottom, 2 sides, and a top!!
Have to sand the vents but new veneer is looking good.
Thanks Tab, where is my invoice for those radios... I wanna play with them ,LOL
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
(This post was last modified: 02-01-2014, 08:07 PM by
OldRestorer .)
Posts: 411
Threads: 42
Joined: Sep 2008
City: Ironton Ohio
Trust me my wife wants them out of the living room floor as bad as you want an invoice, I will put that at the top of my list for sun. Now that its warmer I should get caught up.
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
So I have glued and clamped, and now I have to wait 24 hours.
No caps and no resistors in the mail yet... What to do for 24 hours.. Hmmmmmmm.
Attached Files
Image(s)
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
(This post was last modified: 02-02-2014, 09:40 AM by
OldRestorer .)
Posts: 15,527
Threads: 545
Joined: Oct 2011
City: Jackson, NJ
Beer.....women....shooting rats in the basement with BB gun....
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Wine, Married, Only rat I have is my wifes chihuahua and I am out of Co2 cartridges anyway
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Clamps are off!
Next is filling all the defects, then grain filling and finally toning.
Attached Files
Image(s)
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 736
Threads: 26
Joined: Jun 2013
City: Hayward, California
Curious, What grain filler do YOU use?
(This post was last modified: 02-03-2014, 05:45 PM by
Warren .)
Users browsing this thread: 1 Guest(s)
Recent Posts
Correct model 84 Ac plug an cord type
From what I read Philco went to using brown rubber power cords in 1936, so cloth was used in the 1935 and earlier models...Arran — 11:25 PM
Correct model 84 Ac plug an cord type
Hi Bruce,
I have not worked on an 84, but in general, power cords for almost any radio prior to 1938 was cloth covered...MrFixr55 — 08:34 PM
Restoring Philco 38-14
OK, well, so after staring at the sch again, I realized the problem had to be the #12/12A padder.
I put a scope on the o...morzh — 08:15 PM
Correct model 84 Ac plug an cord type
Hello Bruce,
I mostly use brown far as my cloth powercords go !
Here is the plug that I have used bakelite Acorn style...radiorich — 08:05 PM
Correct model 84 Ac plug an cord type
Looking for as correct as can find the right Ac plug an the correct colored cloth line. Ive seen many old photos but mos...Bruce — 04:13 PM
Restoring Philco 38-14
Rod
Two Y-caps make sense if you use them from L/N to the chassis; this is only makes sense in the transformer radios...morzh — 10:11 AM
Restoring Philco 38-14
Mike, I'm curious about a specific use of he Y cap. Lately I've seen a single cap across the power transformer primary. ...RodB — 09:01 AM
Restoring Philco 38-14
hello morzh ,
That sounds like a plan !
Sincerely Richardradiorich — 07:45 AM
Restoring Philco 38-14
Richard,
It helped some, but I still had the whining when engaging the rear power strip (I did not realize it was fro...morzh — 07:07 AM
Restoring Philco 38-14
Hello morzh,
Yes , that dreaded hum in my room where i do alighment I have my cable modem and router plus desktop plus ...radiorich — 11:25 PM
Who's Online
There are currently 2431 online users. [Complete List ]» 1 Member(s) | 2430 Guest(s)