Philco 45 Butterfly Restoration Chronicles....Finished
Posts: 4,106
Very Punny Kenny,
Quote...
"I will say this, If you use Oven cleaner for stripper, Gojo for a wood moisturizer , Howard's "Ignore a finish", or Polyurethane. And you are satisfied with these ?,.. then you won't be needing my help, I don't practice those applications."
Yeah I am not a fan of those ideas. Never tried oven cleaner but I like to hand sand most of the time unless there are detailed pieces or legs..
UGH legs stink,
I just finished collecting and placing every piece of old veneer and will glue today after some appts. Only missing a few pieces though. I think I may need to go very dark on the finish, like black toner due to water stains and very dark spots.
Attached Files
Image(s)
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 5,220
Kenneth, thanks for the offer for advice on cabinet restoration!
Posts: 16,581
So you are gonna use this painted veneer?
Posts: 4,106
I want it as original as possible and will strip the veneer once secured to the new top and front.
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 1,114
If you have already gone to all the trouble of making the new front, you may as well finish it with new veneer.
Posts: 4,106
New issue,
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 4,106
Well the glue finally dried and I removed the planer and the table. It came out nice and flat, thank gosh!
Sanded it down, replaced the missing veneer I didn't have, then added the decorative raised veneer. Then I cut out the vent holes in the new top veneer and done for the day
Now it is again a waiting game:
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
(This post was last modified: 02-01-2014, 07:25 PM by
OldRestorer .)
Posts: 411
Looks great, im glad to see someone besides myself that would save a cabinet in such bad shape rather than trash it.
Posts: 4,106
Ok so cabinet now has a bottom, 2 sides, and a top!!
Have to sand the vents but new veneer is looking good.
Thanks Tab, where is my invoice for those radios... I wanna play with them ,LOL
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
(This post was last modified: 02-01-2014, 09:07 PM by
OldRestorer .)
Posts: 411
Trust me my wife wants them out of the living room floor as bad as you want an invoice, I will put that at the top of my list for sun. Now that its warmer I should get caught up.
Posts: 4,106
So I have glued and clamped, and now I have to wait 24 hours.
Attached Files
Image(s)
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
(This post was last modified: 02-02-2014, 10:40 AM by
OldRestorer .)
Posts: 16,581
Beer.....women....shooting rats in the basement with BB gun....
Posts: 4,106
Wine, Married, Only rat I have is my wifes chihuahua and I am out of Co2 cartridges anyway
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 4,106
Clamps are off!
Next is filling all the defects, then grain filling and finally toning.
Attached Files
Image(s)
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 736
Curious, What grain filler do YOU use?
(This post was last modified: 02-03-2014, 06:45 PM by
Warren .)
Users browsing this thread: 1 Guest(s)
Recent Posts
Restoration of the Canadian General Electric A-87
Thanks for your help Michael. In fact, this video is only an intermediate result. Later I had to apply another tinting l...RadioSvit — 09:01 AM
Restoration of the Canadian General Electric A-87
Great job on the cabinet.
PS. In the US notation, "kenotron" refers to specific type of tubes; we call re...morzh
Part numbers to model cross
This document has at least some tables of models and parts used.
Example: Choke 32-7572, used in 604 radio.
Search f...morzh
Restoration of the Canadian General Electric A-87
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM
Restoration of the Canadian General Electric A-87
Well... While the varnish is drying up, I started repairing the chassis...
Of course I started by replacing the pa...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin,
Welcome aboard our little community what great Model 38-7
Sincerely Richardradiorich
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin.
I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim,
We have this index put together by Dale Cook but I don't think that is quite what you are looking for.
The Parts...klondike98
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM
Who's Online
There are currently 1033 online users. [Complete List ]» 2 Member(s) | 1031 Guest(s)
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
