Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Did I just Find Original 20 / 70 Grille Cloth?
#1

    I did a buy out last week of an deceased radio repairer, Many items and boxes to go thru !
I came across this ! There appears to be enough for 6 more tombstone or Cathedral radios, was enough for maybe 8 but some was cut out.
There was an invoice from 1974 in with it?
What do you guys think?
Rock


Attached Files Image(s)
   
#2

Looks familiar

Save me one for my 570 clock. The stuff on it now looks like poop.

Nice!
#3

It's the correct pattern for 21, 70, 90, 71, 91, 19, older 89, and more...(not 20 though)...

But no one was reproducing grille cloth in 1974. That's the year I started collecting. As I recall, no one was reproducing anything yet at that time.

--
Ron Ramirez
Ferdinand IN
#4

Back then nobody cared any old tablecloth would do.
Terry
#5

Nice find! Probably some other treasures in there as well Icon_clap
#6

Nice find let us know what else you come across thats interesting.
#7

This is my question, answered nicely! Can I get some of it for my late 89B from 1933?
#8

Here is a bit of blasphemy for you - Ron turn your head.

There were 3 patterns sold by GCH with that pattern. The only difference was color. They were Patterns 1. 2 and 24. Pattern 24 was described as a "weathered look" of pattern 2, but could be better described as a reddish brown version. This pattern was also used on some of the big, late 30s Zenith consoles.

If what you have is that pattern, I would be better to hold on to it intact, since these console take a larger piece. A GC similar to pattern 1 is being reproduced currently.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#9

Russ, who is GCH?....oh, probably GrilleCloth Headquarters?
#10

Sorry, yes it is.

By the way, I saved pictures of all of the old patterns, if they are ever needed.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#11

Phlogiston Wrote:There were 3 patterns sold by GCH with that pattern.

Yes, I know that - I helped John develop many of those patterns, actually, by providing samples and critiquing the new products as they developed. (I didn't help with the 70/90 pattern, but I did help with some of the other Philco patterns he used to offer.)

If you're counting #24 (and I never did since it was not authentic), there were four variants, actually.

#1 (whiskey)
#2 (copper)
Unknown number (a combination of whiskey and copper)
#24 "weathered look"

--
Ron Ramirez
Ferdinand IN
#12

Agreed Ron, but I don't know what the 4th pattern was. Anyway the poorly colored pattern 24 is great for Zeniths, and if anybody comes by some of this nasty stuff, I would be happy to have it. It also was a perfect match for some 30s Crosleys and other makes.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#13

I looked at a couple different versions of John's old site last night via the Wayback Machine, and did not see the combination whiskey/copper variation. Maybe that variation was sold by Michael Katz instead of John Okolowicz? Anyway, I not only remember the cloth, I had some sets pass through my possession that had that cloth installed.

Some Philco 89s and a few other 1933 Philcos did use a factory copper version of that cloth, so it was good that John offered both.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently 3364 online users. [Complete List]
» 1 Member(s) | 3363 Guest(s)
Avatar

>