I finally finished my 66B
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
The electronics were done this winter, including all of the Bakelite blocks (thanks to many tips from Phorum members). I've been waiting for some nice weather to finish the cabinet.
I had to replace the veneer on both sides and the top. I finished it with Mohawk toners. Medium Brown Walnut and Van Dyke Brown for the trim. The grill cloth is a repro that is somewhat close to original.
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 1,532
Threads: 242
Joined: Sep 2012
City: West Bend, Wisconsin
Looks great, Eric. Well done. I think that is the same grill cloth I used on my 1935 model 89B.
Greg V.
West Bend, WI
Member WARCI.org
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
B-E-A-utiful job, veneer is perfectly flat and looks original. where did you get the veneer and what type is it? paper backed?
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Thanks guys.
Kirk,
The veneer is from Rockler . It is pressure sensitive. No messing with glue, etc.
I've used it before and have always had great results.
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 16,266
Threads: 566
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Eric
Great looking radio.
I have mine 66 to attend to (a different cabinet though).
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
Great looking radio Eric, well done!
Gregb
Posts: 201
Threads: 26
Joined: Dec 2005
City: Morris Plains, NJ
VERY nice work, Eric!
Those Rockler veneers are very easy to use and yield great results.
Pete AI2V
Posts: 395
Threads: 33
Joined: Jul 2013
City: Horsham, PA
Eric,
You did a beautiful job on the cabinet. It it plays half as well as it looks, then you have one heck of a radio.
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Thanks, it sounds great hooked up to my long wire antenna. Now I just have to find a place to put it!
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 736
Threads: 26
Joined: Jun 2013
City: Hayward, California
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Great job Eric. Really sharp looking. Have to look into that type of veneer. Looks like the way to go.
Posts: 847
Threads: 50
Joined: Feb 2013
City: Shenandoah,
State, Province, Country: Pennsylvania
Wow Eric that is beyond beautiful, simply flawless!
Ron
Bendix 0626. RCA 8BX5. RCA T64
Philco 41-250. Philco49-500
GE 201. Philco 39-25
Motorola 61X13. Philco 46-42 Crosley 52TQ
Philco 37-116. Philco 70
AK 35 Philco 46-350
Philco 620B. Zenith Transoceanic B-600
Philco 60B. Majestic 50
Philco 52-944. AK 84
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Thanks everyone. It means a lot coming from my peers. 
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 4,409
Threads: 415
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Super Deluxe!
Paul
Tubetalk1
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
An attempt to remove the Field Coil from a G speaker
|
| Mike;
I've only run into a speaker with an open filed coil twice, and they were on newer speakers from the 1940s. One ...Arran — 12:48 AM |
|
An attempt to remove the Field Coil from a G speaker
|
| Arran
Yes, this is my plan for now and what do I got to lose, this is not even the speaker from this radio, but one o...morzh — 10:44 PM |
|
An attempt to remove the Field Coil from a G speaker
|
| Mike;
I would unwrap the field coil, and see if maybe there a break near one of the ends, like where the coil wire att...Arran — 10:23 PM |
|
An attempt to remove the Field Coil from a G speaker
|
| ...and this is what I did. I fed a little LT into the screwholes with a small brush, and a little on the rim next to the...morzh — 09:52 PM |
|
Philco 40-120C Restoration
|
| I combined the two 40-120C threads together as we like to keep the discussion of the same radio together. It helps with...klondike98 — 09:36 PM |
|
Philco 40-120C Weak, Distorted Ouput
|
| Just checked were I buy tubes price is four dollars. So living in Florid we have a local source for tubes. David David — 09:14 PM |
|
Philco 40-120C Weak, Distorted Ouput
|
| The higher voltage may be due to higher mains voltage. My mains run 120-125AC when the set was new mains would be 110-11...David — 09:09 PM |
|
Philco 40-120C Weak, Distorted Ouput
|
| Thank you for your reply. I pulled a speaker from a Philco 41-221 and received the same result. I used a signal tracer t...bluecap — 08:45 PM |
|
Philco 40-120C Weak, Distorted Ouput
|
| Have you tried a different speaker?
How did you trace the distortion?
How do you know it is weak? What is the reference?...morzh — 08:33 PM |
|
Philco 46-480 Electronic Restoration
|
| Amen to that! Every time I think I’ve captured them all, I realize that there’s another error. My goal is to finish with...jrblasde — 07:00 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
