I finally finished my 66B
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
The electronics were done this winter, including all of the Bakelite blocks (thanks to many tips from Phorum members). I've been waiting for some nice weather to finish the cabinet.
I had to replace the veneer on both sides and the top. I finished it with Mohawk toners. Medium Brown Walnut and Van Dyke Brown for the trim. The grill cloth is a repro that is somewhat close to original.
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 1,523
Threads: 240
Joined: Sep 2012
City: West Bend, Wisconsin
Looks great, Eric. Well done. I think that is the same grill cloth I used on my 1935 model 89B.
Greg V.
West Bend, WI
Member WARCI.org
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
B-E-A-utiful job, veneer is perfectly flat and looks original. where did you get the veneer and what type is it? paper backed?
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Thanks guys.
Kirk,
The veneer is from Rockler . It is pressure sensitive. No messing with glue, etc.
I've used it before and have always had great results.
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Eric
Great looking radio.
I have mine 66 to attend to (a different cabinet though).
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
Great looking radio Eric, well done!
Gregb
Posts: 201
Threads: 26
Joined: Dec 2005
City: Morris Plains, NJ
VERY nice work, Eric!
Those Rockler veneers are very easy to use and yield great results.
Pete AI2V
Posts: 395
Threads: 33
Joined: Jul 2013
City: Horsham, PA
Eric,
You did a beautiful job on the cabinet. It it plays half as well as it looks, then you have one heck of a radio.
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Thanks, it sounds great hooked up to my long wire antenna. Now I just have to find a place to put it!
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 736
Threads: 26
Joined: Jun 2013
City: Hayward, California
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Great job Eric. Really sharp looking. Have to look into that type of veneer. Looks like the way to go.
Posts: 813
Threads: 49
Joined: Feb 2013
City: Shenandoah,
State, Province, Country: Pennsylvania
Wow Eric that is beyond beautiful, simply flawless!
Ron
Bendix 0626. RCA 8BX5. RCA T64
Philco 41-250. Philco49-500
GE 201. Philco 39-25
Motorola 61X13. Philco 46-42 Crosley 52TQ
Philco 37-116. Philco 70
AK 35 Philco 46-350
Philco 620B. Zenith Transoceanic B-600
Philco 60B. Majestic 50
Philco 52-944. AK 84
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Thanks everyone. It means a lot coming from my peers. 
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 4,381
Threads: 412
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Super Deluxe!
Paul
Tubetalk1
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
trying to identify this wire type
|
| The red wire is rubber covered wire.
The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM |
|
trying to identify this wire type
|
| Greetings Phorum members,
Hope you can help me identify this type of wire in the photo I have attached. I am not sure ...georgetownjohn — 01:53 PM |
|
Philco 60 Squealing
|
| All correct shields must be in place, all tubes correct no subs of any kind.
Check any soldered, riveted ground conne...Chas — 01:24 PM |
|
Philco 60 Squealing
|
| I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM |
|
Philco 46-420 Code 121 Reception issues
|
| Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
|
Philco 46-420 Code 121 Reception issues
|
| You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
|
Philco 42-1008 conversion kit
|
| Interesting. I haven't seen that before.klondike98 — 07:02 PM |
|
12' Philco
|
| Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM |
|
Shadow Meter Bulb
|
| Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
|
Shadow Meter Bulb
|
| Ok. Thanks for the correction.RossH — 03:09 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
