Posts: 365
Threads: 76
Joined: Oct 2014
City: Winter Haven, FL
I found this on craigslist for $80. I can't seem to find any info on Remler wood consoles. I found lots of stuff about their table bakelite units. Anybody have any info about this? And maybe if it's a good buy?
Thanks,
Pat
(This post was last modified: 11-07-2014, 10:56 AM by Patrick.)
Posts: 16,577
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
If it is clean inside...maybe. Provided the speaker is good.
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
Looks like it might be an amputee though...
No matter where you go, there you are.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
It has a short.............................cabinet.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 365
Threads: 76
Joined: Oct 2014
City: Winter Haven, FL
(11-08-2014, 09:21 PM)Phlogiston Wrote: It has a short.............................cabinet.
So do I. But I think I'll pass. Thanks to you all.
Posts: 4,950
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
Given the weekend warrior refinish, the missing legs, broken escutcheon, broken speaker grille, mystery knobs, $80 is way to much, maybe $30-40 tops, if it had everything still in the back, but preferably less. As I keep explaining to people, it's the restoration costs in time and money that nails you, sometimes even if the radio is free it's too much.
Regards
Arran
Posts: 365
Threads: 76
Joined: Oct 2014
City: Winter Haven, FL
(11-09-2014, 03:11 AM)Arran Wrote: Given the weekend warrior refinish, the missing legs, broken escutcheon, broken speaker grille, mystery knobs, $80 is way to much, maybe $30-40 tops, if it had everything still in the back, but preferably less. As I keep explaining to people, it's the restoration costs in time and money that nails you, sometimes even if the radio is free it's too much.
Regards
Arran
I agree 100%. My time isn't worth much because it's a hobby, and caps and resistors are cheap, but the rest can cost an arm and a leg, and you'll never be able to sell it for more than you have invested. I used to restore classic cars as a hobby, and if you weren't careful, you could put $25,000 into a car, and only sell it for $20,000. At least with this hobby, my bank account doesn't suffer as much, and my wife lets me sleep in the bedroom rather than the garage.
Users browsing this thread:
|
Recent Posts
|
Philco 42-345 Restoration/Repair
|
Ok MrFixr55,
I have tried the DeoxIT D5 on the band switch and even though it has relieved the tension I felt when turn...osanders0311 — 11:11 AM |
Part numbers to model cross
|
Is there a reference somewhere where you can punch in Philco part numbers and see what models those parts were used in?Jim Dutridge — 10:17 AM |
Philco 42-345 Restoration/Repair
|
Hi OSanders,
Look carefully at the band switch. Turn it slowly and "wiggle" it around the desired band. ...MrFixr55 — 12:33 AM |
5U4 vs 5Z4 tubes
|
I think that RCA and GE introduced metal tubes in the USA in 1936. I don't know if they were being made by RCA, GE or b...MrFixr55 — 11:20 PM |
Philco 42-345 Restoration/Repair
|
Vlad95,
Thank you for the stringing guides and wow there are so manyosanders0311 — 06:01 PM |
5U4 vs 5Z4 tubes
|
A pre war Hallicrafters, and an early one too, very nice! 1936 is pretty early for metal tubes too, which would explain ...Arran — 05:58 PM |
Philco 42-345 Restoration/Repair
|
Thanks Rod,
"When you hear the background hiss and no station it usually indicates that the oscillator quit" ...osanders0311 — 05:52 PM |
Philco 42-345 Restoration/Repair
|
RodB
:beerchug:Vlad95 — 10:22 AM |
Philco 42-345 Restoration/Repair
|
Vlad, you nailed it. Swiss and German roots.RodB — 09:54 AM |
5U4 vs 5Z4 tubes
|
Well this is a Hallicrafters SX/9 circa 1936.
No real issues so far although I dodged a real bullet with a cap that was...bridkarl — 07:59 AM |
Who's Online
|
There are currently no members online. |
|

|