Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

NY radio makers?
#1

How may I find the name of companies making Broadcast radios in New York State during the time from 1930 to 1932?

Regards,
Steve
stephentetorka@cs.com
#2

Hi Steve,

I don't have anything specifically for the period 1930-1932, but I do have a 1944 Sylvania Tube Complement Manual which lists the following receiver manufacturers in the State of NY in 1944:

Air King Products Co. (Brooklyn)
Allied Engineering Institute (NYC)
American Communications Corp. (NYC)
Amplex Radio Corp. (NYC)
Andrea Radio Corp. (Woodside, L.I.)
Ansley Radio Corp. (NYC)
Bell Radio & Telev. (NYC)
Brunswick Radio Div., Mersman Bros. Corp. (NYC)
Canton Trading Co. (NYC)
Colonial Radio Corp. (Buffalo)
Dewald Radio Mfg. Corp. (NYC)
Dictograph Products Co., Inc. (NYC)
Eastern Radio Specialty Co. (NYC)
Emerson Radio & Phonograph Corp. (NYC)
Espy Mfg. Co. (NYC)
Fada Radio & Electric Co. (Long Island)
Federated Purchasers, Inc. (NYC)
Ferguson Radio & Television Co. (NYC)
Finch Telecommunications, Inc. (NYC)
Freed Mfg. Co. (NYC)
Freely Corp. (NYC)
Garod Radio Corp. (NYC)
General Television & Radio Corp. (NYC)
Grebe Mfg. Co., Inc. (NYC)
Gross Radio, Inc. (NYC)
Hammarlund Mfg. Co. (NYC)
Jefferson-Travis Radio Mfg. Corp. (NYC)
Karns-White Corp. (NYC)
Lafayette Radio Corp. (NYC)
La Salle Radio Corp. (NYC)
Luxor Radio Mfg. Co. (NYC)
Mansley Radio Corp. (Baldwin)
Marconiphone, Inc. (NYC)
Marine Radio Corp. (Jamaica)
Namco Mfg. Co., Inc. (NYC)
Pacent Engineering Corp. (NYC)
Philmore Mfg. Co. (NYC)
Pilgrim Electric Corp. (NYC)
Pilot Radio Corp. (Long Island, NYC)
Port-O-Matic Corp. (NYC)
Presto Recording Corp. (NYC)
Radio Constructors Labs (NYC)
Radiomarine Corp. of America (NYC)
Radio Supplies (NYC)
Radio Transciever Labs (Richmond Hill)
Radio Wire Telev., Inc. (NYC)
Regal Amplifier Mfg. Corp. (NYC)
Sara Co. (NYC)
Savil Radio Engineering Corp. (NYC)
Sillcox Radio & Telev. Corp. (NYC)
Sky Chief Radio Corp. (NYC)
Sonora Elec. Phonograph Co., Inc. (NYC)
Stromberg-Carlson Tele. Mrg. Co. (Rochester)
United Cinephone Corp. (NYC)
United States Telev. Mfg. Corp. (NYC)
Universal Tube Mfg. Co. (Brooklyn)
Westinghouse Electric Supply Co. (NYC)


This list includes New York State only. Many others just across the border, such as RCA Mfg. Co. at Camden, NJ.

It is impossible to say just how many of the above actually manufactured their own receivers, and how many were buying either full or partially-assembled sets from others.

As mentioned, this list is from 1944. Most likely a list from 1930-1932 would be much longer, as many companies folded during the Depression.

The only State even remotely approaching New York in number of radio manufacturers was Illinois, and those were almost all either in or near Chicago.

Poston
#3

Hi Poston:

Thank you for the very helpful info.

Now I have to find a 1931 New York mfg. 7-tube radio whose antenna enters via a 235 whose grid and plate are grounded...with the ant signal going to that 235 cathode....closest I've found is a Delco...but that's not NY.

Regards,
Steve




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM

[-]
Who's Online
There are currently 1356 online users. [Complete List]
» 2 Member(s) | 1354 Guest(s)
AvatarAvatar

>