Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

fused 2 or 3 prong male plug ends 120v US
#16

i noticed some odd ball tags on this hobby lobby cord like one that said "use as temp only wiring for less than 60days".

they claim the stranded wiring is 22awg but i measure .040 inches which is 18awg

the insulation is rated to be 105degC.

there is no UL marking so im thinking they "china" found a loop hole in order to supply a polarized cord with on off sw & a lamp socket and lamp without testing.

it came with a couple spare 5amp mini fuses , a 25watt 120v bulb so.... im sure it will be fine for an antique lamp i am doing.
#17

Perhaps they are trying to discourage people from permanent use of extension cords. Wnen we arrived at my wife's parents house, the basement, and connections to outbuildings were teaming with extension cords of every type and capacity running thihs way and that, daisy chained - you name it, I saw it! Shocking...

Mostly this was in place of running proper electrical service, and it was truly horrifying to me, but people do crazy things and get away with it most of the time... I can't understand how there was not a fire or an electrocution.

I don't hold with furniture that talks.




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM
Philco 91 Speaker Replacement
As Rod said, it is OK to use a fitting speaker, and then look for an original one. If you buy a Hammond 125 output tr...morzh — 08:15 AM
Philco 91 Speaker Replacement
Yes, I often have to substitute, then keep an eye out for an original. In the meantime, the radio is working and being e...RodB — 08:02 AM

[-]
Who's Online
There are currently 5198 online users. [Complete List]
» 1 Member(s) | 5197 Guest(s)
Avatar

>