[PhilcoPhan1936]

I've had a busy Summer, so I'm starting to find time to continue to chip away at this. All the Bakelite Blocks are done, and I've started on the electrolytics. The single 8ufd, and the dual 8ufd-10ufd have been gutted, and re-stuffed. Still working on reconnecting the dual. For the dual, I opted to drill a hole in the bottom of the cap, feed the wires through, and connect to the tabs, rather than trying to do internal connections. The ground wire had to connect to an external tab anyway, for a floating ground.

[Image: https://farm5.staticflickr.com/4417/3640...315b_b.jpg]

[Image: https://farm5.staticflickr.com/4388/3684...5b7e_b.jpg]