10-16-2017, 12:49 AM
While I had them removed, I decided to see if I could do anything about the melted rubber that supports the back end of the acoustic clarifiers.
[Image: https://farm5.staticflickr.com/4475/2387...4218_b.jpg]
[Image: https://farm5.staticflickr.com/4444/3767...f3a3_b.jpg]
I posted on the Facebook Philco Group, and was directed to a video Eddie Brimer did of how he rebuilt his.
I drove around to a couple places, and wound up with some wide orange NBA rubber bracelets to use. Using a leather hole punch for the holes, and cutting them to length, I was able to install them neatly after cleaning the old rubber out carefully with an x-acto knife.
Again, since they aren't seen, they'll do....
[Image: https://farm5.staticflickr.com/4489/3769...fb88_b.jpg]
[Image: https://farm5.staticflickr.com/4475/2387...4218_b.jpg]
[Image: https://farm5.staticflickr.com/4444/3767...f3a3_b.jpg]
I posted on the Facebook Philco Group, and was directed to a video Eddie Brimer did of how he rebuilt his.
I drove around to a couple places, and wound up with some wide orange NBA rubber bracelets to use. Using a leather hole punch for the holes, and cutting them to length, I was able to install them neatly after cleaning the old rubber out carefully with an x-acto knife.
Again, since they aren't seen, they'll do....
[Image: https://farm5.staticflickr.com/4489/3769...fb88_b.jpg]
Blessings,
Jeff W.
Jonesboro, Arkansas
http://jeffsradios.weebly.com
God loves you as you are, not as you should be, because none of us are as we should be. - Brennan Manning
