Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

66B (looks like a MB)
#1

Time to have a look at this cabinet, but I have a question. Was this 66 cabinet available w/o the black accents on the trim? I realize that this one has been stripped.


Attached Files Image(s)
           

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#2

(11-02-2017, 05:04 PM)Radioroslyn Wrote:  Was this 66 cabinet available w/o the black accents on the trim?

No. At least, not from the factory.

--
Ron Ramirez
Ferdinand IN
#3

Thanks just wanted double check to be sure.
Gluing up a joint or two and then it's time for
David Rose and his orchestra to start playing.
https://www.youtube.com/watch?v=5bLX06yR3wY

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#4

That decal looks like a balloon script!
I will get to my 66MB one day.. Icon_lol

Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#5

I'm surprised Ron didn't tell me it was the wrong font  [Image: http://philcoradio.com/phorum/images/smi...on_lol.gif].
Obtw found ur leg.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#6

Awesome!
I cant stand it tipping back every time I touch it.
Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#7

Still working on the 66B cabinet and hope have it clear coated Monday or so. While I was working onthe 66B I pulled out the old 39-80. The finish was really rough on it so it got the same treatment as the 66B but it was easier to work on . Just waiting for it to cure before a rubdown.


Attached Files Image(s)
       

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#8

Very nice Terry. Icon_thumbup
#9

Did the grain filling a couple of days ago but wasn't happy with the results. It made the fnt look too dark. Sanded it out and got it looking much better. Got it all toned and edges painted black but manged to sand though the toner on the top so have to go back over that. Then on to a few coats of sealer, sanding, and gloss. Oh still have the wooden top/front trim and wooden dial escutcheon.


Attached Files Image(s)
   

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#10

So I think I'm done w/it till it's time to polish it out. I didn't glue and nail the trim back on as it will make it more difficult to polish. The grille cloth is from a 60MB as is the trim, it was badly damaged from the previous cabinet work (sanded all most flat). Didn't really like it so much when I was refinishing it but it's starting to grow on me.

Is the rumor true that radio collectors after a long time start to look like their sets???


Attached Files Image(s)
       

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#11

Very nice, Terry.
Kirk should be getting nervous. Icon_lol

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#12

It's just four less sets I'll have to bug him about  [Image: http://philcoradio.com/phorum/images/smi..._lolno.gif].

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#13

I like it!
Icon_clap Icon_clap Icon_clap




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
trying to identify this wire type
Here's one source for your wire of many. Take care and BE HEALTHY! Gary P.S. Can't get the right color you need? I ...GarySP — 06:40 PM
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM

[-]
Who's Online
There are currently 3958 online users. [Complete List]
» 2 Member(s) | 3956 Guest(s)
AvatarAvatar

>