07-26-2023, 09:10 AM
The cap is Mershon, generally 8mf but may have a section in some radios up to 18mf. I replace the entire cap with a vegetable can (so I have a platform for a terminals strip). One could install insulated feed through into the can and mount caps inside. In view that modern caps only have 5 yr life easy access for replacement is desirable.
Gutting the Mershon is a fool's folly as well as messy and serves no purpose other than to brag "yes I can, can"
)
If the chokes can be measured and are around 30hy, 2-4mf is fine. At that value metalized will be O.K. and have an unlimited life. In the 20's, accomplishing 4 mf in a paper cap was done with multiple .5 units
Mounting a perfboard or a double terminal strips with brackets will make for a neat repair. Arranging the cylindrical metallized in even, "cord-wood" rows..
As always, when suggesting:
YMMV...
Chas
Gutting the Mershon is a fool's folly as well as messy and serves no purpose other than to brag "yes I can, can"
)If the chokes can be measured and are around 30hy, 2-4mf is fine. At that value metalized will be O.K. and have an unlimited life. In the 20's, accomplishing 4 mf in a paper cap was done with multiple .5 units
Mounting a perfboard or a double terminal strips with brackets will make for a neat repair. Arranging the cylindrical metallized in even, "cord-wood" rows..
As always, when suggesting:
YMMV...
Chas
Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”
