Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Power cord specifications for 52-T1612
#16

@Chas, @MrFixr55

I'm really enjoying the side thread about all the wonderful TV shows from my youth, so keep them coming.  It brings a great big smile to my face (more below).

With regards to the main topic (replacement cord).  I was not so much concerned about authenticity as I was about not damaging the pins, with regards to a new cord.  If I can find a period appropriate cord, that would be great, but I'm OK with something that will fit properly, not damage the pins and will work reliably.

That said, here is a photo of the pin configuration with the back cover removed.

   

Several things to note:

- The spacing between the center of the pins is 5/16"
- The width between the 2 metal "tabs" is 3/4" (max width of the plug)
- The pins are approximately 3/8" deep from pin tip to base of pins
- with the cover on, it is 11/16" from the back of the cover to the base of the pins
- The opening on the back cover for the power cord is 1/2" (H) x 11/16" (W)

Let me know if you need any other information.

I've included photos of the back cover and also of the set with an episode of Mary Tyler Moore Show playing.

......................................

A lot of fun TV shows to think about from my youth.

In the NYC area we had

2 - WCBS (CBS)
4 - WNBC (NBC)
5 - WNEW (Metromedia)
7 - WABC (ABC)
9 - WOR (RKO - Independent)
11 - WPIX (Independent)
13 - WNET (Public Television) -> Billy Joel reference - "All your life is Channel 13"

Ch 9 had Winky Dink, Ch 11 had Captain Jack McCarthy "6 bells, 3 O Clock and all is well" was his trademark phrase.
Ch 5 had Wonderama on Sunday mornings from 8 till noon, and Soupy Sales weekday afternoons.
Ch 9 had Knicks, Rangers (and sometimes NY Nets) games, usually on tape delay.

and Channel 11 had the Yuel log (a continuous loop of a fireplace with Christmas Music) on Christmas Eve and Christmas morning.

Also BTW Chas, my wife and I have a small room off the side of the Kitchen (our Parlor) which holds period pieces from the 30s, 40s and 50s (1946 Zenith Console w Phono, The Philco TV, Chair from the 30's, Candlestick Phone and phone stand, etc. Called the room that, because that is what one side of the family called their living rooms.

Good times indeed !


Attached Files Image(s)
       
#17

Here is what I have, USED, 6’ long no cuts or abrasions, pins size, space agree, continuity is OK. May have to file slightly the back fiber board, do not use clip as board is slotted.

PM will not allow attached images contact info will be there.

I have posted new images, the earlier images were HUGE...

                   

Chas

Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind ... That is a MIL-5015 style connector, used in a wide v...DaleHCook — 10:19 AM
Philco P45-6365 Universal Transformer Instruction Manual
I would suggest changing the topic from "P45-6365 Universal Transformer" to "45-6365 Universal IFT."...DaleHCook — 10:08 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated. By dconant. Dittos'Jimradio — 08:01 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind, even if it's a U.S.N power supply. I have a book somewhere abo...Arran — 02:56 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
hello david, I have a similar generator in my collection that features a cast iron, single-cylinder Briggs & Stratt...radiorich — 01:00 AM
under chassis parts locator diagram for 1938 Zenith 9s262
Has anyone gone to the trouble of creating an under chassis parts locator image?  Yes, I can identify components by foll...bobloney — 08:57 PM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
Try looking at this site the book mark is for a old generator that I was given. David    https://radionerds.com/index.ph...David — 08:36 PM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
Hello Everyone, I am looking for voltage identification for all the pin positions on the socket of a CRV-20130 power su...Tonym4704 — 08:16 PM
Philco P45-6365 Universal Transformer Instruction Manual
Can anyone guide me to where this may be found?GRG — 03:00 PM
54C Complete Teardown/Rebuild
I don't think that I have encountered a 12Z3 before, curious how it uses one of those but includes a #43, which is a 25 ...Arran — 02:17 PM

[-]
Who's Online
There are currently 1744 online users. [Complete List]
» 1 Member(s) | 1743 Guest(s)
Avatar

>