1. The PHILCO Phorum
  2. Various and Sundry Categories
  3. Other Radios (Non-Philco)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Threaded Mode
Pilot G-674 restoration
OldRestorer
Electronic geneus
*****
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
#1

01-27-2016, 04:58 PM
I finished my Pilot G-674!

I dismantled it, cleaned it, did a full re-stuffing recap and resistor redo, and put her back together.. First picture is the before and last is the after.
I removed all the caps and labeled every wire since I am not the greatest with schematics. I then baked the caps at 300* until the wax melted out. I took a screwdriver and quickly pushed out all the insides before the wax got hard again. I put all the new caps in each one, stuffed them with hot glue almost to the ends and then crushed up the original wax, put it in the ends and melted it over the glue. They came out just like the originals so that made me happy. I re-stuffed the Ecaps on top and bottom also.

Me

       
[attachment=9243]    


Attached Files Image(s)
   
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
(This post was last modified: 01-27-2016, 04:58 PM by OldRestorer.)
Find
OldRestorer
Electronic geneus
*****
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
#2

01-27-2016, 05:00 PM
More pictures

       
   
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Find
klondike98
Phorum Moderator
******
Posts: 5,098
Threads: 270
Joined: Nov 2012
City: Wilsonville State, Province, Country: OR
#3

01-27-2016, 05:09 PM
Lookin' good Kirk Icon_clap Icon_clap Icon_clap
Cheers,
Bob
[Image: https://www.dropbox.com/s/5m63ib99yfx2eg....jpg?raw=1]
Bob's Restorations Web Page
Website Find
KCMike
Phorum Expert
*****
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
#4

01-27-2016, 05:32 PM
Nice job Kirk. How well does it play?
Find
mikethedruid
Banned
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
#5

01-27-2016, 05:34 PM
Very nice job so far. I look forward to hearing about the alignment, and how it receives and sounds when completed.
Find
Kenneth F. Besso Jr.
Senior Member
****
Posts: 667
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
#6

01-27-2016, 05:45 PM
        BeautiFUL,,,Clean,,nice Job,,,eeeasy on the eyes
Find
OldRestorer
Electronic geneus
*****
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
#7

01-27-2016, 08:01 PM
Here she is all finished...
LOL, Mike I cant align radios very well but this one doesn't seem to need it. It plays well all over the dial.

http://vid821.photobucket.com/albums/zz1...G_0074.mp4
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Find
sam
Phorum Expert
*****
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
#8

01-27-2016, 08:22 PM
Kirk
Nice job. But.   Eye tube did not work
I'll pick it up this weekend

Not That me. But me me
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Find
OldRestorer
Electronic geneus
*****
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
#9

01-27-2016, 08:32 PM
You are welcome to it Sam. The 6G5 is dead. I have a new 6E5 I will put in.

Now I have to repair the extensive termite damage.... Grrrrrr.

Best Me  Icon_wave
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Find
Paul Philco322
Super Moderator
******
Posts: 4,385
Threads: 412
Joined: Jun 2011
City: Boston State, Province, Country: Massachusetts
#10

01-27-2016, 09:55 PM
Looks like a winner, make sure the Termites is all gone!

Paul
Tubetalk1
Website Find
OldRestorer
Electronic geneus
*****
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
#11

01-28-2016, 10:11 AM
They are long dead! The really ate the crap of the cabinet though. Only on part of the base wood under the veneer though. I have to fill along the whole side and top of the inside of the radio where they tunneled...


Attached Files Image(s)
           
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Find
leftwing25
Member
***
Posts: 85
Threads: 13
Joined: Jul 2015
City: Rockville, MD
#12

02-03-2016, 03:33 PM
Can you use a 6e5 to replace a 6g5? I didn't think they were interchangeable.
Find
OldRestorer
Electronic geneus
*****
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
#13

02-03-2016, 04:49 PM
Yes you can use the 6E5 for the 6G5

Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Find
leftwing25
Member
***
Posts: 85
Threads: 13
Joined: Jul 2015
City: Rockville, MD
#14

02-03-2016, 05:09 PM
Thanks, Kirk. Good to know. The 6gs and 6us are a bit too pricey. I guess a 6e would work for a 6u as well?
Find
Arran
Phorum Expert
*****
Posts: 4,724
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
#15

02-06-2016, 03:03 AM
(02-03-2016, 03:33 PM)leftwing25 Wrote:  Can you use a 6e5 to replace a 6g5?  I didn't think they were interchangeable.

 You can use a 6E5 in place of a 6G5 but the 6E5 is a more sensitive tube so the shadow will sometimes overlap. The 6E5 will react to less grid voltage then a 6G5 or a 6U5, so it may require some circuit modification for the 6E5 to perform properly.
Regards
Arran
Find
« Next Oldest | Next Newest »




Users browsing this thread: 7 Guest(s)
[-]
Recent Posts
Want to get my Philco working again
Just one question, Perry. You do know that the NFC North is confirmed LION(s) Territory!GarySP — 09:44 PM
Want to get my Philco working again
There are actually quite the host of parts websites available! There’s Mouser, Digikey, etc. for general electronics com...jrblasde — 09:44 PM
Want to get my Philco working again
Thank you all for the replies. I’ve gotten into old stereos too so soldering isn’t too hard. Good to hear I can get the ...Gbtr6 — 08:23 PM
Want to get my Philco working again
I have one of those that I restored. Not a bad sounding/performing radio. Needs new socket and all new capacitors.rfeenstra — 06:22 PM
Want to get my Philco working again
Welcome to the Phorum, Perry. Your console is a 41-295X. You can access the schematic in our Philco Service found at t...GarySP — 06:21 PM
Want to get my Philco working again
Welcome to the Phorum. The reason the tube broke is probably because of those two gold helmets on top :PRodB — 05:37 PM
Want to get my Philco working again
See, the model, then go to, go to Philco, put the model in, open the document, locate the tube, locate it in the sch. Th...morzh — 03:23 PM
Want to get my Philco working again
Hi all, I have an old Philco radio that i remember fondly from my younger days. It sat out on the porch of my dad's a...Gbtr6 — 03:14 PM
38-690 on ebay
This was discussed here last week. And the place to post is "Items For sale online"morzh — 02:37 PM
38-690 on ebay
I saw this 38-690 close on ebay at a great $.  If you hadn't seen it bodes well for values imo. Not sure if this is the...poulsbobill — 12:34 PM

[-]
Who's Online
There are currently 943 online users. [Complete List]
» 2 Member(s) | 941 Guest(s)
AvatarAvatar

>
  1. The PHILCO Phorum
  2. Various and Sundry Categories
  3. Other Radios (Non-Philco)