Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

38-12 dial lamp antenna?
#1
Lightbulb 

This is weird!
Got a 38-12 on the bench, and there is a dial lamp socket wired between the antenna coil and ground,
with red and green wire about a foot long between the socket and the set, I wouldn't even be posting this
except the wire on the socket and solder connections in the set look virgin.

anyone see an antenna connection that is a dial lamp socket?

Weird, yea!

Keith
#2

Can't say that I ever have. Does it light up???

Terry
#3

(11-18-2015, 12:48 PM)Radioroslyn Wrote:  Can't say that I ever have. Does it light up???

Terry

I cant imagine it does, except maybe briefly when lightening hits nearby. There was no bulb in the
socket.  I think Ill leave it on, make a screw base for an antenna and have it as a conversation piece
when I sell it.  Part of the radio's history!

Keith
#4

Well, by the time lightning got to the little bulb, even CSI Crime Lab couldn't find it, anyone remember "Lightning Arrestors?"




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit.  That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM
Hickok AC51 tube tester
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM

[-]
Who's Online
There are currently no members online.

>