Metal Case Condensers

Radio Manufacturers Service. Your Guarantee of Best Radio Service

• METAL CASE CONDENSERS •

WAX-PAPER BYPASS AND FILTER BLOCKS

Metal Can Bypass Condenser Metal Can Filter Block

PHILCO by-pass condensers in metal containers are made by the same exacting process as the smaller condensers in the black bakelite containers. They are pitch dipped and sealed. These condensers are built for continuous service and will hold up under the most extreme operating conditions.

BY-PASS PAPER CONDENSER SPECIFICATIONS (Metal Housing)
Capacity Mfd.	Number of Papers	Test Voltage	Part No.
.2		800	30-4102
.25	3	2000	4264
.25*		800	30-4175
.25 Twin	2	1200	3557
.25 Twin*	2	1200	4864
.25 Triple	2	1200	03325
.5	2	1200	3583
.5*		800	30-4174
.5*	3	2000	05150
.5 Twin	2	1200	03024
.75		800	30-4103
1.0**	2	400	4568
1.0*		800	30-4173
1.0*	3	2000	4569
1.5		800	30-4104
2.0	2	800	03298
2.0	3	2000	4418
.5 / .25 / .25 Filter Block	3 / 2 / 2	2000/1200/1200	03029
.5 / .5 / .25 / .25 Filter Block	2 / 2 / 2 / 2	1200/1200/1200/1200	04407
.05 / .05 / .25 / .5 Filter Block	2 / 2 / 2 / 3	1200/1200/1200/1200	05324
.75 / .5 Filter Block	2 / 3	1200/2000	05213
1. / .25 / .25 Filter Block	2 / 2 / 2	1200/1200/1200	04830
1. / .25 / .1 Filter Block	2 / 3 / 3	1200/2000/2000	03327
* Not grounded to case. ** Two special low-impedance shielded leads connect to one side of condenser. Other side is grounded to the case.

Condenser Bank Type-A Condenser Bank Type-B Condenser Bank Type-C

These PHILCO filter condenser banks incorporate the highest standard of both material and workmanship. They are designed and built to meet the most exacting requirements. Furnished in the following combinations of capacities and voltage operating requirements. Standard PHILCO vacuum impregnation; pitch sealed. Each condenser bank is packed in its own individual carton with complete wiring instructions and color code explanation.
[Note: Filter Block types are not electrolytic, but wax-paper construction.]

PAPER FILTER CONDENSER BANK SPECIFICATIONS

Capacity of Sections (Mfd.) Test
Voltages Type Part No.

8.0*/.25* 400/1200 A 05386

8.0*/.5* 400/1200 A 05724

8.0*/.85* 500/1200 A 05691

.75/.25 2000/1200 B 04559

.75/.5* 1200/1200 B 05213

.5*/.09* 400/400 B 06713

.5/.25 2000/1200 A 04959

.25/.25 1200/1200 B 05109

.15*/.05 2000/2000 A 06091

20.0/.5/.25 15/2000/1200 A 04354

1.0/.25/.25 1200/2000/1200 B 03624

1.0/.25/.1 1200/2000/1200 B 03327

.5/.5/.25 1200/2000/2000 A 05239

.5/.5/.15* 2000/1200/2000 B 4817

.5/.25/.25 2000/1200/2000 B 03029

.5*/.25/.25 1200/1200/1200 B 30-4027

.5/.25/.25* 2000/1200/2000 A 05622

.5/.25/.05 1200/2000/2000 B 05433

.25/.09/.05 800/400/800 B 30-4044

.25/.05/.05 2000/2000/2000 B 04731

1.0/1.0/1.5/0.13 1200/1200/1200/1200 C 4235

20.0/.5/.25/.25 15/2000/1200/1200 B 30-4017

.5/.5/.25/.25 1200/1200/1200/1200 B 04407

3.5*/1.0*/.13*/1.0* 800/800/1200/800 C 4860

.5/.25/.05/.05 1200/2000/2000/2000 B 05324

.05/.09/.09/.5 2000/1200/1200/2000 B 30-4013

.25/.25/.25/.25 1200/1200/2000/2000 B 30-4078

.75*/.25*/.2*/.09*/.05 1200/1200/1200/1200/2000 B 30-4000

.5/.5/.25/.15/.2 1200/1200/1200/2000/1200 B 03945

.5/.5/.25/.15/.1 1200/1200/1200/2000/2000 B 03459

.015*/1.0*/.5*/.5*/.5* 1200/400/400/400/800 C 03489

.5*/.5*/.25*/.15*/.1* 1200/1200/1200/2000/2000 B 05569

.5/.25/.15/.1/.5 400/400/800/800/400 B 03915

.25/.09/.09/.05/.05 2000/1200/1200/2000/2000 B 06624

.25/.5/.05/.05/.05 400/400/800/800/800 B 30-4151

.05/.09/.09/.5/.2 2000/1200/1200/2000/1200 B 30-4063

1.0/2.0/2.0/.5/.5 1200/2000/2000/2000/2000 C 30-4026

.5*/.25*/.2*/.09*/.09*/.05* 1200/1200/1200/1200/1200/2000 B 30-4023

.25/.25/.25/.05/.05/.05 400/400/400/800/800/800 B 30-4077

* Not grounded to case.